1. Looked up owners and parts manuals on-line to see how the blower came apart.
2. Took out all apparent screws holding case together, but the case would not come apart. Tried prying, cursing and tugging, then looked at parts diagram again, finding two additional screws under the decal on the side of the case. Scraped holes in th
... Read moree decal, took out the additional two screws and it came apart nicely.
3. Replaced the cord with the compression caps and began putting the case back together. It is a bit of a trick to get the spring holding the screen frame on the bottom of the case in place while keeping the plastic nozzle spring (on the front of the machine) in place. After a few tries, it went together ok. Put the case screws back in, checking that each was firmly seated (the case is plastic, so don\'t use a power drill or they may strip out).
4. Tested the blower (with the extension cord properly connected to reduce the strain on the plug) by showering the neighbor\'s driveway with leaves. Most satisfying!
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP18709217
Manufacturer Part Number: 3640127
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
