This part is an original part from Toro and Lawn Boy for use in lawn tractors. The spacer fits between the spindle housing and the bearing shield. An allen wrench may be necessary during the installation of this part. Over time this part may break will need to be replaced. This item is sold individually and is made of metal.
1. Removed deck from Toro Z4200.
2. Impacted wrenched off spindle pulley nuts, removed pulleys.
3. Stood deck on itGÇÖs side and impact wrenched off the blades and tapped out spindle shafts.
4. Using drift punch and hammer knocked out both bearings from each of the spindle housing,
Spacers in between bearin
... Read moregs might break due to the material made of.
5. Cleaned up inside of spindle housing, applied never seize compound to bearing bores,
Install one bearing, then a new spacer then second bearing. Might need to support the
spacer with the bladeGÇÖs shaft to center it while installing second bearing in the spindle
housing. Used drift punch and hammer carefully on outer race to install bearings. Bearings
should be touching the spacer. You can try use an old bearing to place on the new bearing
to tap in place with hammer.
6. Install shaft, blade and pulley.
7. After reinstalling all components spin the rotating assembly hand and the rotation should be
smooth with no binding, like free-wheeling. If not recheck if parts are binding/touching the
housing in any way or a clearence problem between bearings. The metal spacer is needed
to take the tightening load off the bearings in the spindle housing.
8. Reinstall deck to mower and test.
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
(1993)_WW_26.gif "Part Location Diagram of 62-3661 Toro Spacer")
(1993)_WW_26.gif "Part Location Diagram of 62-3661 Toro Spacer")
