Housing-spindle 88-4510

Starting with a new deck housing, moved all plates and pulleys that were still usable. most of the nuts and bolts were still usable but some new were purchased where the old ones broke while being removed. new spindle housings were necessary since every bolt snapped holding them onto the old deck and removal of the broken bolts destroye ... Read more d the old spindle housings. The new spindle housings came without threaded mounting holes so a tap was necessary to make the new spindle housings mountable. New bearings were installed and the old shafts were used. This new deck was installed on the old Toro zero turn lawn tractor. A new engine was also installed along with new belts. The new engine was bolt for bolt compatible and way cheaper than rebuilding the old engine that threw a rod. Over all, the entire project was accomplished at a cost of 20% of a new zero turn mower and the mower is now operating reliably and smoothly. a little spray paint and voila... a pretty new machine.

Had to put threads on spindle

1 Removed the old spindle.
2 put all the pieces together.
3 Installed the new spindle.