Close
Phone 1-855-343-0069
Cart
Official OEM Guarantee
Fast shipping from USA
365 Day Returns
Preferred Brand Partners
8950300-1-M-Toro-32149-2-Nut-keps
Part Location Diagram of 32149-2 Toro Nut-keps
See part B-22 in the diagram
8950300-1-S-Toro-32149-2-Nut-keps 360 view
( Grid squares measure 1x1 inch )
8950300-1-S-Toro-32149-2-Nut-keps 8950300-2-S-Toro-32149-2-Nut-keps 8950300-3-S-Toro-32149-2-Nut-keps 8950300-1-S-Toro-32149-2-Nut-keps 360 view
Part Location Diagram of 32149-2 Toro Nut-keps

Nut-keps 32149-2

Manufactured by:
Toro
ERP Number:
ERP8950300
Part Number:
32149-2
Original Equipment Manufacturer ?
  Works with your model  72108!
$5.95
In Stock
Delivers in 3-5 Business Days!

A Bit Difficult 

1- 2 hours 

(3 rated repairs) ?
  Works with your model   72108!

Jump to:

Description Troubleshooting Questions & Answers Repair Instructions Model Cross Reference

Product Description

?

This part is available as an individual replacement. The nut-keps attaches to the lower bracket-housing. A wrench might be helpful during the installation of this part. This is made of metal and will require replacing if it breaks. It is a genuine OEM sourced part which is specially designed for use with Toro and Lawn Boy snowthrowers.

Troubleshooting

This part works with the following brands:
  • Toro
  • Lawn Boy
This part works with the following products:
  • Lawn Tractor
  • Snow Blower
  • Chainsaw
  • Lawn Mower
  • Lawn Tractor Accessories
  • Cement Mixer
  • Leaf Blower / Vacuum
  • Cultivator
  • Stump Grinder
  • Log Splitter
  • Trimmer
Part# 32149-2 replaces these:
32149-2,

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

Be the first to ask our experts a question about this part!

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

A Bit Difficult 

1- 2 hours 

(3 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Snow Thrower: worn drive belt, worn and broken scraper blade, worn rubber impeller blades

Ralph from Trenton, New Jersey

1 person found this instruction helpful.
Difficulty Level:
Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
Parts Used:
161-2170, 55-9300, 55-8760, 3229-11, 32149-2
1. Removed side panel cover over drive train
2. Removed and replaced Drive belt.
3. Removed Scraper Blade bracket
4. Removed old Scraper Blade
5. Straightened bottom panel on which scraper blade mounts (badly bent)
6. Installed new Scraper Blade
7. Removed and replaced Rubber Impeller Blades (This is th e worst part. There is no access to side nuts without removing the impeller shaft, drive pulley, bearings,belt, etc. Use small needle-nose vise-grips to hold the nuts in place, AND hold the rubber blade to the impeller shaft frame while driving the Torx bolts with a power nut driver, and a Flex-extension on the driver).
8. Replaced Side panel.
Read less
Did you find this story helpful?
Thank you for voting!

Rubber rotor blades were shot and so was front scraper so I replaced them both.

James from Tomah, Wisconsin

1 person found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Pliers, Screw drivers, Socket set, Wrench set
Parts Used:
161-2170, 136-7182, 55-8760, 3296-56, 3229-11, 32149-2
One rotor at time, however after pulling first rotor did the scraper bar.
Did you find this story helpful?
Thank you for voting!

worn out scraper blade

DONALD from DUNLAP, Iowa

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
Parts Used:
55-8760, 3229-11, 32149-2
removed old blade, screws and nuts and replaced with new blade, bolts and nuts
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP8950300
Manufacturer Part Number: 32149-2
Brand Model Number Description
Toro 02000 Chainsaw - Grounds Pro 2000 3 Wheel Drive
Toro 02001 Chainsaw - Grounds Pro 2000 4 Wheel Drive
Toro 02002 Chainsaw - Grounds Pro 2000
Toro 02003 Chainsaw - Grounds Pro 2000-D
Toro 03102 Lawn Tractor - Lawn Tractor
Toro 03104 Lawn Tractor - Lawn Tractor
Toro 03112 Lawn Tractor - Lawn Tractor
Toro 03113 Lawn Tractor - Lawn Tractor
Toro 03200 Lawn Mower - 70-Inch Professional 1966
Toro 03201 Chainsaw - 70-Inch Professional 1967
Toro 03202 Cultivator - 70-Inch Professional 1968
Toro 03204 Chainsaw - Reelmaster 108
Toro 03210 Lawn Mower - 70-Inch Professional
Toro 03211 Chainsaw - 70-Inch Professional
Toro 03212 Chainsaw - 70-Inch Professional
Toro 03219 Chainsaw - Reelmaster 108
Toro 03221 Chainsaw - 70-Inch Professional
Toro 03222 Chainsaw - 70-Inch Professional
Toro 03231 Chainsaw - 70-Inch Professional
Toro 03232 Chainsaw - 70-Inch Professional
Toro 03410 Chainsaw - Reelmaster 216 2 Wheel Drive
Toro 03410TE Lawn Mower - Reelmaster 216 2 Wheel Drive
Toro 03430 Lawn Mower - Reelmaster 216 3 Wheel Drive
Toro 03535 Chainsaw - Turf Pro 84 With 5-Blade Cutting Units
Toro 03537 Chainsaw - Turf Pro 84 With 7-Blade Cutting Units
Toro 03600 Chainsaw - Reelmaster 335-D
Toro 03601 Chainsaw - Reelmaster 335-D 4 Wheel Drive
Toro 03654 Chainsaw - Light Kit Reelmaster 335-D
Toro 04350 Chainsaw - Greensmaster 3000
Toro 04351 Chainsaw - Greensmaster 3050 2 Wheel Drive
Nut-keps
$ 5.95
In Stock
✖
Stock Status
✖
Mail-In Recycling Rebate

Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.

✖