It is a genuine OEM supplied part that is made for use with Toro lawn and garden equipment. A muffler is utilized to soften the noise coming from the engine's exhaust. It is a high-quality replacement for a damaged or a missing component that was installed on a new equipment. Note, one durable metal body muffler is included. To ensure the proper replacement procedure, refer to the diagrams for your specific model. A wrench set will be needed to perform this repair.
Troubleshooting
This part works with the following brands:
Toro
This part works with the following products:
Lawn Tractor
Lawn Mower
Part# 117-7461 replaces these:
117-7461,
★
Customer Part Reviews
?
5.0
Average Rating (out of 5):
★★★★★
★★★★★
(2 Reviews)
Click to filter by ratings:
5 stars
2
4 stars
0
3 stars
0
2 stars
0
1 star
0
< Prev
1
Next >
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Easy replacement, part fits perfectly
The part arrived in perfect condition and replacement was straightforward. It's so great to have a resource like this for lawnmower parts.
Guest - May 25, 2019
Verified Purchase
★★★★★
★★★★★
worked well fit perfectly
the muffler fit well the gal went out of her way to find the exact part from the many mufflers
Guest - July 13, 2021
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Removed the bolts holding the manifold to the engine with the hex wrenches and the mounting bolt from the frame to remove the old muffler. The new muffler bolted right on using the old bolts and nuts. I applied loc-tite to the muffler bolts that went from the manifold into the engine.
Did you find this story helpful?
Thank you for voting!
Muffler needed to be replaced due to hole in muffler.
Removed the muffler by removing the two hex screws and bolt holding the muffler to the frame. Cleaned the area around the gasket. Attached the muffler and gasket with the two hex screws and reinstalled the bolt holding the muffler to the frame. Very easy project.
Removed two bolts from exhaust manifold
removed bolt holding the support bracket for the muffler
put the new muffler on to the bolt that goes through the support bracket
reattached the muffler to the exhaust manifold and tightened
tighten the support bracket bolt
cut the lawn
1. Removed heat shield mounted to muffler
2. Removed nut securing muffler to frame
3. Removed two nuts securing muffler to engine block
Presoaked nuts securing muffler to engine block with PB Blaster. Muffler does not come with new gasket, must order separately. Replacement muffler of very good quality.
1, Spray down the two muffler bolts \"Allen Head\" with penetrating oil. Note; Let it soak for at least one hour. ON A COOL ENGINE
2. Remove air cleaner. Note: This is to gain access to the muffler mounting bracket bolt.
3. Remove nut from muffler bracket.
4. Carefully remove Allen Head bolts from muffler pipe attached t
... Read moreo exhaust manifold. there is a gasket between the muffler pipe and exhaust manifold inspect and replace if needed. Note; The gasket does not come with the new muffler.
5. Before installing new muffler, clean the threads of the muffler bolts with a \"toothbrush\" wire brush.
6. Line up new muffler bracket onto threaded stud and install nut. Do not tighten yet.
7. Line up muffler pipe of the new muffler with exhaust manifold and thread allen head bolts into manifold.Note; be sure you have the gasket in place.and tighten both bolts evenly.
8 Go back now and tighten muffler bracket bolt.
9, Reattach air cleaner, Note, this would be a good time to replace air cleaner filter!
10, Start mower and check for anything unusual. smoke, vibration, etc.
11. If all is good, run mower cut grass for about one hour, let it cool down and RECHECK the tightness of the muffler bolts.
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
(2010)_WW_6.gif "Part Location Diagram of 117-7461 Toro Muffler")
(2010)_WW_6.gif "Part Location Diagram of 117-7461 Toro Muffler")
