This is a genuine OEM sourced replacement fuel tank. It is specially designed for Murray riding lawn mowers and tractors. This assembly includes the fuel tank and the cap. Please note, the hardware to secure it and the fuel hose are not included, they are sold separately. Make sure to drain the old gas tank before starting the repair. You will need a a screwdriver and pliers to replace this fuel tank.
Troubleshooting
This part works with the following brands:
Murray
Briggs and Stratton
This part works with the following products:
Lawn Tractor
Lawn Mower
Lawn Tractor Accessories
Part# 7601092MA replaces these:
7601090MA, 7601092MA,
★
Customer Part Reviews
?
4.5
Average Rating (out of 5):
★★★★★
★★★★★
(6 Reviews)
Click to filter by ratings:
5 stars
4
4 stars
1
3 stars
1
2 stars
0
1 star
0
< Prev
1
Next >
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Gas tank replacement
Old gas tank on my rider mower needed replacing due to a leak and due to age of unit. The new replacement was installed and filled with fuel and mower was back in service once again.
Guest - May 11, 2019
Verified Purchase
★★★★★
★★★★★
Exact part for my mower
I replaced the tank in 10 minutes. Looked axactly like the original part and I have not had any problems with the tank.
Guest - June 17, 2019
Verified Purchase
★★★★★
★★★★★
Gas tank
Easy to order. Received on date as promised, easy to install, works great.
Guest - October 1, 2019
Verified Purchase
★★★★★
★★★★★
EXACTLY what I needed
Brand new work perfect have to wait several days,high price for such small part n different kind of tax I haven't seen before
Guest - April 16, 2020
Verified Purchase
★★★★★
★★★★★
perfect part
fit perfectly
Guest - July 19, 2019
Verified Purchase
★★★★★
★★★★★
Great part but 6 months on back order
The part was great but disappointed at the time it was on back order otherwise I would have given 5 stars
Guest - February 7, 2023
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Had to remove (4) small screws on the housing just above the Tank to allow room for tank removal. Remove (4) screws on tank. Lift out tank. Use pliers to remove hose from tank. Reverse process for installation.
1. Removed 4 screws on each side holding the housings (2) around the fuel tank.
2. Disconnected the fuel line at the carburetor and drained the fuel tank into a gas can.
3. Removed the 4 screws holding the fuel tank in place.
4. Took out the fuel tank.
5. Removed the fuel line from the bottom of the old tank.
... Read more>6. Attached the fuel line to the bottom of the new tank.
7. Installed the new tank with the 4 screws holding it in place.
8. Connected the fuel line to the carburetor.
9. Put the housings back in place with the 4 screws.
10. Put a little gas in the tank to check for leaks in the fuel line.
11. Started the engine. Presto! Done!
1. Drained the tank.
2. Removed the mounting screws.
3. Removed the fuel line.
4. Removed the tank and replaced with new one.
5. Reconnected and secured.
Did you find this story helpful?
Thank you for voting!
Fuel line was too short. It did not reach from gas tank to carberator.
1. Remove the shroud (8 screws total).
2. Remove the old gas tank and the fuel line (4 screws total).
3. Install the fuel line on the new gas tank.
4. Install the gas tank (recommend adding fuel filter and shut off valve).
5. Connect the fuel line to the carburetor (clasps not included).
6. Install the shrou
... Read mored.
Put in new/replacement I received was the perfect fit removed blades from bottom now wife and grandson use it as a 4 wheeler to haul tools,hay and whatever else Thank You BOB
Did you find this story helpful?
Thank you for voting!
Gas tank leaking from a crack on the bottom of the tank
Removed 2 screws and loosen 2 screws on the top cover. Then removed 4 screws holding the tank in. Loosen and remove hose. Put everything back in reverse order. The tank was drained earlier.
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Tank or Container","title":"Tank or Container","url":"/parts/lawn-and-garden/lawn-tractor/tanks-and-containers/"},{"position":2,"name":"7601092MA","title":"7601092MA","url":""}]
_WW_3.gif "Part Location Diagram of 7601092MA Murray Fuel Tank Kit 1.4")
_WW_3.gif "Part Location Diagram of 7601092MA Murray Fuel Tank Kit 1.4")
