Part Location Diagram of 165X119MA Murray Spring - Extension
See part F18 in the diagram
( Grid squares measure 1x1 inch )

Spring - Extension 165X119MA

Manufactured by:
Murray
ERP Number:
ERP8877916
Part Number:
165X119MA
Original Equipment Manufacturer ?
  Works with your model  425624X190A!
In Stock
Delivers in 3-5 Business Days!

Easy 

Less than 15 mins 

(6 rated repairs) ?
  Works with your model   425624X190A!

Product Description

?

This is an authentic Murray item that is supplied by the original manufacturer. It is specially designed for use with lawn tractors. The extension spring applies tension on the connected parts. Over time it can wear out and stretch eventually requiring a replacement. Note, this high-quality extension spring is made of durable metal and is sold individually. Refer to the appropriate diagrams for your model for the exact location and application of this hardware.

Troubleshooting

This part works with the following brands:
  • Murray
  • Briggs and Stratton
This part works with the following products:
  • Lawn Tractor
  • Lawn Mower
  • Lawn Tractor Accessories
Part# 165X119MA replaces these:
165X119MA,

Customer Part Reviews

?
5.0
Average Rating (out of 5):
★★★★★
★★★★★
(5 Reviews)
Click to filter by ratings:
  • 5 stars
    5
  • 4 stars
    0
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

Be the first to ask our experts a question about this part!

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

Less than 15 mins 

(6 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

The extension spring was jostled off in long grass last autumn and could not be found.

Marc from Plainfield, Wisconsin

14 of 14 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
165X119MA
Slide one end, the long end into the slot of the tensioner pulley assembly. Hook the other end of the spring to the end of the engagement lever. Ta Da! You are done.
Did you find this story helpful?
Thank you for voting!

Spring broke that operates blades .

Randall from Gastonia, North Carolina

7 of 7 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
165X119MA
It was the lever spring that engages the blades .
First you hook the short end of the spring on deck brkt , then hook the long end of the spring to the hand lever .
Did you find this story helpful?
Thank you for voting!

Steering bearing wore out

Charles from Fredericksburg, Virginia

7 of 7 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set, Wrench set
Parts Used:
94124MA, 165X119MA
1. Removed mower deck and moved gas tank aside to gain access.
2. Removed clip from bottom of steering shaft.
3. Jerk up on steering wheel to remove partially - just enough to come out of bearing and leave in place to side of bearing. Steering gear will drop off if you didn\'t pull it off in last step.
4. Used sock et extensions to unbolt bearing and bolt new one in place. Pay attention to top vs bottom of bearings. Steering gear won\'t fit back on if you get it reversed.
5. Insert steering column through bearing.
6. Position steering wheel and front tires for steering straight ahead.
7. Insert steering gear on shaft and replace C-clip.
8. Put everything else back on.
Did you find this story helpful?
Thank you for voting!

Replacement spring

garland from winchester, Kentucky

3 of 3 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
Parts Used:
165X119MA
Just installed the spring
Did you find this story helpful?
Thank you for voting!

Spring broke.

Carol from Ocala, Florida

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
165X119MA
Just attached the spring to the blade handle.
Did you find this story helpful?
Thank you for voting!

spring broke that engaged blades

Rondal from GLASGOW, Kentucky

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
165X119MA
Old spring broke and new on replaced and everything went just great. Mower back in service.
Did you find this story helpful?
Thank you for voting!
  • 1