Part Location Diagram of 941-0337 MTD Bearing-flange
See part I46 in the diagram
( Grid squares measure 1x1 inch )

Bearing-flange 941-0337

Manufactured by:
MTD
ERP Number:
ERP9311581
Part Number:
941-0337
Original Equipment Manufacturer ?
In Stock
Delivers in 3-5 Business Days!

A Bit Difficult 

More than 2 hours 

(2 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

It is an authentic manufacturer-sourced component which is specially designed for use with riding lawn mowers and garden tractors. The purpose of this flange bushing is to provide a tight fit between connected parts. If the original item is damaged or is missing, this will provide an identical replacement. This part is made of high-quality metal and is sold individually. Check the owner\\\'s manual and the diagrams for your model to ensure the correct replacement procedure. A wrench set will be needed to perform this repair.

Troubleshooting

This part works with the following brands:
  • MTD
  • Yard Machines
  • Cub Cadet
  • Yard Man
  • Troy-Bilt
  • Bolens
  • Husky
  • Craftsman
  • Ryobi
  • Toro
This part works with the following products:
  • Lawn Tractor
  • Lawn Mower
  • Lawn Tractor Accessories
Part# 941-0337 replaces these:
  • 741-0337
  • 941-0337

Customer Part Reviews

?
5.0
Average Rating (out of 5):
★★★★★
★★★★★
(1 Review)
Click to filter by ratings:
  • 5 stars
    1
  • 4 stars
    0
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

A Bit Difficult 

More than 2 hours 

(2 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Bad seals and bearings in the rear end.

pete from calamus, Iowa

2 of 2 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Socket set
Jack up back of mower, remove tires and then remove the seat, battery the two drive belts, the brake cable, remove pin from shifting arm and disconnect. there are two springs that also have to be removed. One is very strong so you may need some help with it. There is the drive pulley on top of the transmission that I also removed to make the repair work a little easier. I then put the unit on the work bench and removed all the bolts. They all the same length so you can\'t mix them up when you put them back. Be careful removing the top half of the axle because there is a ball bearing under the shifting arm that is spring loaded that can pop out if the arm moves. The parts are all easy to replace, just take your time. You just reverse your steps putting it back together.
Did you find this story helpful?
Thank you for voting!

Transaxle was loose around the seal and bushing.

Don from NEWPORT NEWS, Virginia

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Socket set, Wrench (Adjustable), Wrench set
1. Removed transmission cover and then drive belt from transmission by loosening tension on the Idler pulley.
2. Removed the battery and battery holder. Removed large spring from bracket attached to transaxle.
3. Removed pin to loosen the F N R shifter linkage from the transaxle.
4. Loosened and removed the brake assembl y securing all the springs, pucks, and hardware. 5.Removed four large bolts and two smaller bolts that held the transaxle to the tractor frame.
6. Replaced the seals, bushings, and bearings and added 00 grease.
7. Cleaned and lubed all the parts and transaxle assembly.
8. Reversed the process for reassembly.
9. Success!
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP9311581
Manufacturer Part Number: 941-0337
Brand Model Number Description
MTD 0433850-0282 Lawn Tractor - Lawn Tractor
MTD 1020UP536 Lawn Tractor - Lawn Tractor
Bolens 1050 Lawn Tractor - Lawn Champ
MTD 1050UP537 Lawn Tractor - Lawn Tractor
MTD 1051 Lawn Tractor - Lawn Tractor
MTD 1052 Lawn Tractor - Lawn Tractor
MTD 1052B811-5107 Lawn Tractor - Lawn Tractor
MTD 1057850-0308 Lawn Tractor - Lawn Tractor
MTD 1057A850-0308 Lawn Tractor - Lawn Tractor
MTD 1058A850-0274 Lawn Tractor - Lawn Tractor
MTD 1105UP538 Lawn Tractor - Lawn Tractor
MTD 111-508R002 Lawn Tractor - Lawn Tractor
MTD 111-508R013 Lawn Tractor - Lawn Tractor
MTD 111-508R016 Lawn Tractor - Lawn Tractor
MTD 111-508R019 Lawn Tractor - Lawn Tractor
MTD 111-508R022 Lawn Tractor - Lawn Tractor
MTD 111-508R026 Lawn Tractor - Lawn Tractor
MTD 111-508R029 Lawn Tractor - Lawn Tractor
MTD 111-508R033 Lawn Tractor - Lawn Tractor
MTD 111-508R054 Lawn Tractor - Lawn Tractor
MTD 111-508R057 Lawn Tractor - Lawn Tractor
MTD 111-508R077 Lawn Tractor - Lawn Tractor
MTD 111-508R098 Lawn Tractor - Lawn Tractor
MTD 111-508R105 Lawn Tractor - Lawn Tractor
MTD 111-508R118 Lawn Tractor - Lawn Tractor
MTD 111-508R121 Lawn Tractor - Lawn Tractor
MTD 111-508R129 Lawn Tractor - Lawn Tractor
MTD 111-508R131 Lawn Tractor - Lawn Tractor
MTD 111-508R134 Lawn Tractor - Lawn Tractor
MTD 111-508R138 Lawn Tractor - Lawn Tractor