This is an authentic replacement part for use with outdoor power equipment. This versatile metal lock washer has many applications for use with products like tillers, snowthrowers, and lawnmowers. The washer is sold individually, please see model diagram for part usage.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Easy repair
It was in good condition. Used it with the other parts and now my lawnmower is back working.
Guest - July 23, 2019
Verified Purchase
★★★★★
★★★★★
Good part
EReplacement parts are high quality and durable,making my replacement easy to install.
Joel - August 5, 2019
Verified Purchase
★★★★★
★★★★★
Easy repair arrived quick
Arrived quick , exact parts. Easy to search on the website
Guest - August 12, 2019
Verified Purchase
★★★★★
★★★★★
The right part.
Right part first time. Thanks
Andrew - September 3, 2019
Verified Purchase
★★★★★
★★★★★
Okay
The parts worked but when looking at the mower deck diagram it didnt show that I need the locking flange nut so I didnt order. Trying to find one in local stores but havent found it yet. So that would be my only complaint.
Guest - June 12, 2019
Verified Purchase
Customer Repair Instructions
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Easy
30 - 60 mins
(10 rated repairs)?
< Prev
1
Next >
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
1. Removed the temporary fix.
2. Lowered deck onto wooden shims on the left side set to the same height as the right side.
3. Removed the pin in the linkage to make it easier to line up deck and parts.
4. Installed parts, tightened into place, replace linkage pin.
5. Checked deck height at lowest, idle and highest
... Read morelevels to ensure it was correct.
6. Cleaned up tools and tested mower.
This was easily done in the driveway with basic tools. I would recommend checking all nuts and bolts when you do your spring maintenance and oil changes throughout the year.
Read less
Did you find this story helpful?
Thank you for voting!
Left side of mower deck would not raise or lower. Found adjusting nut and bolt were missing.
1. Installed new adjusting nut.
2. Measured the height of deck on right side.
3. Used wrench to adjust the left side to equal the right side.
4. Tighten everything down, job completed.
Did you find this story helpful?
Thank you for voting!
The mower deck would not adjust to an even level. The part that levels the deck had fallen off and could not be found.
1. I dropped the mower deck from the tractor.
2. Installed the new deck adjustment gear.
3. Reattached the deck to the tractor and cut the grass evenly.
It took about 1 hour. It was a snap with the new correct parts. The parts came within 4 days. Thanks ereplacementparts for your support and superior service.
Did you find this story helpful?
Thank you for voting!
The deck belt was secured by a regular bolt by previous owner. The deck dropped off and the belt broke.
1. Removed deck from lawn tractor by taking off associated cotter pins.
2. Removed broken spindle pulley.
3. Replaced with new spindle pulley.
4. Replaced adjustment gear.
5. Replaced deck by inserting cotter pins into the associated connections.
Did you find this story helpful?
Thank you for voting!
Blade height adjustment gear came loose and I had to replace it .
Lined up the deck adjustment bracket with slots for gear up with another bracket behind it, put bolt through the adjustment gear into two holes that were lined up, put on a nut to tighten into, the correct new nut didn\'t come with the gear, bolt and washer so I improvised with one after I called customer service and they told me a nut wa
... Read moresn\'t available for it, didn\'t make sense but I made it work, I suggest checking it often or putting loctite on the bolt threads so the gear doesn\'t rattle off again.
Set height of deck to be even by putting a board across bottom.
Aligned deck adjustment screw holes
Screwed in Deck Adjustment Gear, washer, and screw
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_(1990)_WW_1.gif "Part Location Diagram of 936-0119 MTD Washer-lock 5/16")
_(1990)_WW_1.gif "Part Location Diagram of 936-0119 MTD Washer-lock 5/16")
