Shaft 938-0569

removed front upper and lower drive belts and pulley from bottom of mower removed battery and battery stand from under seat for access to rear belt and pulley took off plate over shift lever to access center pulley removed snap ring holding sliding center pulley group, remove belts from center pulley(2) forcing idler pulley back to ... Read more allow removal of rear bely removed sliding pulley group from shaft setting aside to replace needle bearings later removed bolt on bottom of center shaft allowing shaft to be removed and replaced with new one. after replacing needle bearings in inner race of sliding pulley group i replaced it on the shaft making sure belts were in place as i went (including belt that goes to top front pulley on bottom of motor)which involves installing front belts on pulley before installing pulley then lining up drift key in slot once all belts and pulleys are installed and bolted down replace battery stand and battery, shift cover &nob