This replacement part is supplied directly from the original equipment manufacturer for use with garden tractors and riding lawnmowers. The ignition switch is used to start the mower\\\'s engine utilized the ignition key. Note, the key is sold separately. This high-quality component is available as an individual replacement part. To ensure the correct installation and application of the new component, refer to the owners manual and the diagrams of your model. Replacing the switch is a simple task that may only require a screwdriver, press the tabs on the side of the switch to pull out the old one and secure the new one.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Exact Match
My new ignition is an exact match to the original part, so it doesn't look like some funky imposter part. # On the green
Richard - April 24, 2019
Verified Purchase
★★★★★
★★★★★
easy repair
part arrived on time, saved me a lot of money fixing this myself.
Guest - July 8, 2019
Verified Purchase
★★★★★
★★★★★
An exact replacement.
Looks like an exact replacement. After further diagnosis, I didn't need this switch.
Robert - October 12, 2019
Verified Purchase
★★★★★
★★★★★
PERFECT!
Perfect / easy replacement!
Guest - May 8, 2020
Verified Purchase
★★★★★
★★★★★
Parts
Great service in getting my part to me. Exactly what was needed to fix my mower. Customer service is great.
Guest - July 16, 2021
Verified Purchase
★★★★★
★★★★★
key
Fit and worked perfect. I was disappointed this did not come with a key or at least mentioned that it would need one. I had to order separately, which meant waiting longer.
Guest - March 22, 2021
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
Be the first to ask our experts a question about this part!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
A little hard getting out the ignition switch didn\'t want to break the hold down tabs but understandable trying to pull something out. Hooked the leads to the switch terminal as they were on the old one. Everything else a breeze. Line up the discharge chute and bolted it on. Just a remove and replace fit like a dream. Can\'t wait for my
... Read morenext project on it.
Press the side tabs in with a small screwdriver, and remove the old switch
Take one wires at a times from the old to the new switch
Press the new switch in
Replaced ignition switch which was worn from years of use. Saved time and $ compared to taking the mower in to a repair shop. Replace it by pressing the side tabs of the switch then replacing the wires one by one and then press the new switch back in
Replaced ignition switch - not problem but think it needed replacing anyway.
Replaced starter solenoid - fixed problem. After much studying, found only way to remove old solenoid was to loosen electric wire connections so you could get a good view of how all wires were set up. Once that was done, easy job to put new solenoid back
... Read morein basically in reverse order (loose wires to allow easy movement) and then final tightening of two hot wires using same 7/16 socket as used to remove them. Don\'t forget to reconnect the battery ground - attaches under one of the 2 solenoid mounting bolts.
Read less
Did you find this story helpful?
Thank you for voting!
Would not start. It did not turn over as opposed to turning over and not firing.
Actually, having not tested the mower\'s parts I did not know what the problem was. I replaced incrementally each part and still no action. Turned out it was a safety switch hidden under the rear carriage. I bi-passed it and it started right up. Back to the switch, replacement is simple. Thirty seconds. As for the solonoid, easy rep
... Read morelacement but the difficulty is space. It is stuck under the carriage by the battery and is not easily accessible. Working space is limited.
Press in the plastic side tabs with a small screwdriver and remove the switch
Exchange the wires from the old switch to the new switch one at a time
Press in the new switch
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP9163215
Manufacturer Part Number: 925-04659
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_9.gif "Part Location Diagram of 925-04659 MTD Switch-key 3 Pos W")
_WW_9.gif "Part Location Diagram of 925-04659 MTD Switch-key 3 Pos W")
