It is a genuine item which is supplied directly from the original equipment manufacturer for use with Yard Machines and MTD lawn mowers and garden tractors. This is an identical replacement for a missing or faulty screw which was installed on a new unit, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this durable part is made of high-quality metal and is sold individually.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Easy find!
Exactly what we needed! Website makes it easy to find right part every time.
Guest - October 14, 2019
Verified Purchase
★★★★★
★★★★★
Well, I guess You can't complain about a simple 3/8" bolt.
This purchase was for a 3/8" bolt. Everything was as expected in fact all of my orders for a few years now have been good with the exception of a discharge chute that was too small and the Return Freight was twice the price of the chute. Be careful and buy local when You can. Freight is Expensive.
Guest - October 15, 2023
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
Be the first to ask our experts a question about this part!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
1. Insert bolt from the bottom of the mower deck and through two guards
2. Place spacer, pulley, and belt
3. Place washer and and flange lock nut
4. Tighten flange lock nut with ratchet socket on the bottom and open end wrench on top
Did you find this story helpful?
Thank you for voting!
Pulley fell off on mower deck
Barret from Center Point, Texas
1 personfound this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
Remove the main belt.
Drop the deck.
Slide it out from beneath the mower.
Replace the bolt, washer, thru the shaft and tighten the nut.
Reinstall the deck and belt and hop on.
Did you find this story helpful?
Thank you for voting!
Idler pulley came off while I was mowing; after inspecting it I found the bearings had gone out. So I went to ereplacementparts.com and found all the components I would need to replace it.
1. I placed the mower on a ramp so I could easily get underneath it to work.
2. Dropped the mower deck all the way down to it\'s lowest position.
3. Installed the new pulley with Hex bolt, flat washers and Hex Flange nut. This only required the use of a 9/16 combination wrench and a 9/16 ratchet wrench.
4. Replaced the b
... Read moreelt and the mower was back in operation.
Read less
Did you find this story helpful?
Thank you for voting!
Guide pulley on mower deck was bent due to bolt failure
1. removed the cutting deck from the tractor
2. lifted the deck on one side and took off the idle pulleys
3. Replace the new idle pulleys
4. put back the cutting deck on the tractor
5. tested the cutting blades for noise and any ruff sound
Did you find this story helpful?
Thank you for voting!
Puller,idler broke,caused the Belt to come off.
Harold from COLLIERS, West Virginia
0 of 1 peoplefound this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Socket set, Wrench (Adjustable), Wrench set
Took off broken parts, and put on new parts. It was easy to medium putting the parts on. Once it was done I attached the mower deck back on the tractor and started cutting grass again.
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP9089292
Manufacturer Part Number: 710-3144
Lawn Mower
- Yard-Man Lawn Mower Model 080733 Parts
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_1.gif "Part Location Diagram of 710-3144 MTD Screw-3/8-16 X 2.0")
_WW_1.gif "Part Location Diagram of 710-3144 MTD Screw-3/8-16 X 2.0")
