Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Great response to my need
Their response time was great and timely. The grass does not wait for me to get the mower repaired. Always have the parts I need.
Guest - May 31, 2019
Verified Purchase
★★★★★
★★★★★
Awesome
Went to 2 different shops and they did not even have the part ! 1 could order would take 2 weeks and 50 bucks. They were not even getting right thing ! Took few more days than we thought but worth the wait .The part fit perfect and 10 minutes had my mower going great ! Will keep you all in the speed file Thank you !
Guest - August 6, 2019
Verified Purchase
★★★★★
★★★★★
Worked perfectly
This part was fit my customer''s troy bilt mower perfectly. Very quick and easy repair for the mower deck.
Guest - September 12, 2019
Verified Purchase
★★★★★
★★★★★
Mower deck adj screw
Gear & bolt fit perfectly. Cut the grass and mower deck remained level.
Guest - September 22, 2019
Verified Purchase
★★★★★
★★★★★
Deck Lever
Came quickly! Thanks So Much!
Guest - April 18, 2020
Verified Purchase
★★★★★
★★★★★
It worked grear
It was cheaper than most
Guest - April 25, 2020
Verified Purchase
★★★★★
★★★★★
good
all was good
Guest - May 8, 2020
Verified Purchase
★★★★★
★★★★★
Mower Deck Leaning
More than 2" to the left. Put Gear on in 5 minute. Very easy job.
Guest - September 8, 2020
Verified Purchase
★★★★★
★★★★★
Riding lawnmower deck gear
Quick delivery. Great site!! Love it!!
Guest - June 22, 2021
Verified Purchase
★★★★★
★★★★★
Great service
The part was, of course, brand new, and arrived in my mailbox in only a couple of days, so downtime was minimal.
Guest - June 17, 2022
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
1. Removed the temporary fix.
2. Lowered deck onto wooden shims on the left side set to the same height as the right side.
3. Removed the pin in the linkage to make it easier to line up deck and parts.
4. Installed parts, tightened into place, replace linkage pin.
5. Checked deck height at lowest, idle and highest
... Read morelevels to ensure it was correct.
6. Cleaned up tools and tested mower.
This was easily done in the driveway with basic tools. I would recommend checking all nuts and bolts when you do your spring maintenance and oil changes throughout the year.
Read less
Did you find this story helpful?
Thank you for voting!
Left side of mower deck would not raise or lower. Found adjusting nut and bolt were missing.
1. Installed new adjusting nut.
2. Measured the height of deck on right side.
3. Used wrench to adjust the left side to equal the right side.
4. Tighten everything down, job completed.
Did you find this story helpful?
Thank you for voting!
The mower deck would not adjust to an even level. The part that levels the deck had fallen off and could not be found.
1. I dropped the mower deck from the tractor.
2. Installed the new deck adjustment gear.
3. Reattached the deck to the tractor and cut the grass evenly.
It took about 1 hour. It was a snap with the new correct parts. The parts came within 4 days. Thanks ereplacementparts for your support and superior service.
bolt wrong diameter hole in adjustment gear too small requiring enlargement of hole......larger retention bolt...after alteration and proper diameter bolt and thread pitch repair was completed satisfactory.
1. Removed deck from lawn tractor by taking off associated cotter pins.
2. Removed broken spindle pulley.
3. Replaced with new spindle pulley.
4. Replaced adjustment gear.
5. Replaced deck by inserting cotter pins into the associated connections.
Did you find this story helpful?
Thank you for voting!
Blade height adjustment gear came loose and I had to replace it .
Lined up the deck adjustment bracket with slots for gear up with another bracket behind it, put bolt through the adjustment gear into two holes that were lined up, put on a nut to tighten into, the correct new nut didn\'t come with the gear, bolt and washer so I improvised with one after I called customer service and they told me a nut wa
... Read moresn\'t available for it, didn\'t make sense but I made it work, I suggest checking it often or putting loctite on the bolt threads so the gear doesn\'t rattle off again.
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
