1. Lift the rear of the mower and insert the jack stands to hold up.
2. Remove the mower deck and slide out.
3. Disconnect the tie-rod ends from the steering gear.
4. Removed 4 side screws holding the plate that steering gear connects to.
5. Drain the gas tank.
6. Unbolt 4 bolts securing the gas tank and lift
... Read more out the gas tank.
7. Backup the hex head bolt below the gas tank and unscrew the nut on the lower plate.
8. Remove the nut from the bottom of the steering wheel and push up the steering column to remove the pinion gear and the washer.
9. Remove screw securing PTO to drop PTO.
10. Use a socket and a box end wrench as a backup on bolts securing the steering gear. Need to tilt the plate to get to the bolts to backup to remove nuts.
11. Reassembled in reverse order.
12. Replaced the plastic pieces on the ends of the tie-rods through which the lock nuts secure the tie-rods to the steering gear.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP16410294
Manufacturer Part Number: 712-3004A
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_1.gif "Part Location Diagram of 712-3004A Husky Lock Nut")
_WW_1.gif "Part Location Diagram of 712-3004A Husky Lock Nut")
