This shaft support is an OEM manufactured by Poulan. The metal support is compatible with many lawn tractors. This component is designed to secure the sector gear and the steering shaft, allowing the operator to turn the wheels. To make the replacement, you will need a screwdriver, pliers and a wrench and socket set. Please refer to specific manual and diagrams for further repair instructions. The shaft support is sold individually.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Perfect replacement part at a fair price.
Thanks you for having what I needed and getting to me as fast as you did!
Guest - June 13, 2019
Verified Purchase
★★★★★
★★★★★
Repair
Part was just what I needed and fit exactly. Works good as new.
Guest - July 9, 2019
Verified Purchase
★★★★★
★★★★★
Couldn’t steer
Steering was gone, parts were easy to find and order, came 3 days sooner than expected. Now l gotta mow =ĖGuest - September 28, 2019
Verified Purchase
★★★★★
★★★★★
Grate experience
Had a great experience will definitely order again when the time comes
Guest - December 18, 2019
Verified Purchase
★★★★★
★★★★★
part was perfect. no problems
the part fit great. fast service. very happy with everything I got.
Guest - May 28, 2020
Verified Purchase
★★★★★
★★★★★
Worked as expected
Arrived quickly. I am up an running again. Thank you!
Guest - June 17, 2020
Verified Purchase
★★★★★
★★★★★
Easy repair
Works like it’s got power steering now.
Bill - October 15, 2020
Verified Purchase
★★★★★
★★★★★
Great part and shipping
Did not take.long at all for the part to arrive and it was the right part !! Will use again
Guest - November 9, 2020
Verified Purchase
★★★★★
★★★★★
reduced slack in steering significantly.
Was surprised to find that part was available. Received part as expected. Found U-Tube video on replacing part. Was not a difficult repair and definitely improved steering.
George - June 14, 2021
Verified Purchase
★★★★★
★★★★★
Nice OEM part, fit good
Worked as designed. Can steer straight now
Guest - September 26, 2022
Verified Purchase
< Prev
1
2
Next >
Customer Repair Instructions
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
A Bit Difficult
1- 2 hours
(10 rated repairs)?
< Prev
1
Next >
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Loose steering
Richard from Concordia, Kansas
6 of 6 peoplefound this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
I disassembled the assembly because I didn\'t relize the shaft pulled out so I could remove the assembly. I still don\'t know what is suppose hold the shaft in preventing it from pulling out of the assembly, I used a radiater clamp on the shaft to stop it from pulling up. The new shaft was 1 inch shorter than the original.
Removed gas tank,
removed dashboard,
removed steering shaft,
removed old worn out part,
installed new bushing,
put everything back together.
works great.
Did you find this story helpful?
Thank you for voting!
thread control lost friction; steering shaft support worn out, loose, gears slipping
Remove and replace thread control using star bit for clamp screws. Adjust lever position.
Remove battery and battery shelf. Remove mower deck. Unbolt steering gears support bracket.
Remove steering shaft support bracket using longer bolt to drive pivot shaft over 1/2 way.
Mark position of pivot gear on knurled piv
... Read moreot shaft in order to reposition correctly.
Remove pivot gear retaining spring clip to allow pivot gear to slide along pivot shaft.
Remove inside bolt holding steering shaft support bracket onto the steering shaft.
Reassemble everything in reverse order installing the new black nylon steering support bracket.
Read less
Did you find this story helpful?
Thank you for voting!
Steering was skipping
Mario from Trenton, New Jersey
1 personfound this instruction helpful.
Difficulty Level:
Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
1. Removed deck
2. Removed steering assembly and steering wheel from dash
3. Removed steering support from assembly, remove circlip and gear shaft, (fairly difficult)
4. Then removed support from steering shaft by sawing it in half, then the screw holding it to shaft
5. Finally installing support to steering shaft,
... Read more then to assembly then paying attention to alignment marks to center pinion to gear, then bolting assembly back in, and steering wheel to dash, then the deck and you are done
Removed gas tank
Removed mower deck
Removed steering wheel and steering shaft extension
remove 4 bolts on bottom of frame to remove the steering assembly
put assembly in vise and remove bolt and c clip so shaft could be removed to replace the worn part. Put mark on large gear so relation to the bar on the shaft is
... Read morepreserved. reassemble being careful to put large gear back on spline in same position.
install assembly on frame and reverse other steps
1. remove deck
2. remove steering wheel and column
3. remove 4 bolts from under mower
4. remove bolt holding steering system to left front wheel
5. pull out steering unit
6. disassemble steering unit
7. remove hex nut to separate steering shaft from support-shaft
8. replace steering support-shaft
... Read more 9. reverse order
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
