Link-strg drag rh 747-06457

1. Straighten steering wheel. Take note of angle of both wheels.
2. Open hood.
3. Use socket to loosen nut under steering spindle with crooked wheel.
4. Loosen stop nut on front steering drag link. (just break it loose, do not thread far)
5. Loosen stop nut on rear of steering drag link. (just break it loose, do n ... Read more ot thread far)
6. Finger tighten stop nut on both ends of drag link until they are just touching the tie rod end.
7. Remove nut from bottom of steering spindle that you loosened in step 3.
8. Pull drag arm free from steering spindle.
9. Spin drag arm free from rear tie rod, leaving tie rod bolted to steering sprocket.
10. Remove tie rod end from front.
11. Measure thread exposure on both ends.
12. Transfer stop nut on rear of drag link threads, place at same thread exposure.
13. Transfer tie rod end from old drag link to new drag link for front of drag link. Place at same thread exposure.
Installation is reverse of removal from #9.