This is an original replacement part manufactured for use with walk-behind lawnmowers. The plastic engine shroud is used to cover and protect the motor. This shroud does not include the main decal and is sold as an individual replacement part.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Cracked shroud replaced
The condition was great. At first it seemed not to fit, but it does. Fast response from eReplace. U tube videos helped too. Mower looks new again. Simple change out after video review.
Stacy - April 30, 2019
Verified Purchase
★★★★★
★★★★★
Cracked shroud replaced
The condition was great. At first it seemed not to fit, but it does. Fast response from eReplace. U tube videos helped too. Mower looks new again. Simple change out after video review.
Stacy - April 30, 2019
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
Be the first to ask our experts a question about this part!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Shroud had been damaged so I removed the old broken one by removing 4 hex head bolts and installed new one. Air filter takes no tools, just twist slightly and the cover comes off, takes a few seconds.
Did you find this story helpful?
Thank you for voting!
My engine shroud was broken last season and just wanted it replaced. I had also been without a cover cutout for several years so wanted to replace it as the grass had a tendency to fly up from under
Simply unscrewed the old broken engine shroud and secured the new one. I did have to \"unthread\" the pull cord and \"re-thread\" it with the new cover but that was no problem. The cover cut-out simply snapped in place. All was easy. Thanks again for the quick and professional (and very courteous) service.
Unbolted the old shroud and removed it.
Cut the starter rope
Cleaned off the engine, it was real dirty
Feed the started rip through the new shroud
Reinstalled the new shroud with four screws.
Removed handle from the starter rope.
Removed cracked shroud using deep well socket
(4 bolts)
Thread starter rope through hole in new shroud and reattached handle
Bolt new shroud down
1. Unscrewed 4 nuts from broken part of the old shroud.
2. Pulled cord little to tie off.
3. Used long nose pliers to pullout tied nut from card holder.
4. Cut off nut and threaded cord thru shroud and cord guides. Tied off with another nut on
the cord holder.
5. Tightened 4 nuts holding shroud
... Read moreonto engine DonGÇÖt over tighten. DONE
Read less
Did you find this story helpful?
Thank you for voting!
Belt running the variable assist power was worn. Engine shroud was fractured, traction cable bent
removed the plastic shrouds for the best and drive components
removed the mower blade
removed the old belt and installed the new one
reattached the shrouds
attached the blade
installed the new traction cable
replaced the engine shroud
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP9277687
Manufacturer Part Number: 38019
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
(2004)_WW_6.gif "Part Location Diagram of 38019 Tecumseh Shroud-engine")
(2004)_WW_6.gif "Part Location Diagram of 38019 Tecumseh Shroud-engine")
