Part Location Diagram of 23-0660 Toro Switch-starter
See part E-31 in the diagram
( Grid squares measure 1x1 inch )

Switch-starter 23-0660

Manufactured by:
Toro
ERP Number:
ERP9272049
Part Number:
23-0660
Original Equipment Manufacturer ?
  Works with your model  74-0980!
$27.95
In Stock
Delivers in 3-5 Business Days!

Easy 

Less than 15 mins 

(2 rated repairs) ?
  Works with your model   74-0980!

Product Description

?

This is a genuine replacement part sourced directly from the manufacturer. The starter switch is commonly found in Toro snow throwers and lawn tractors. This part is made of metal, and is used with the key to signal ignition in the engine. You may require a screwdriver and wrench when replacing this item. The starter switch is sold with a metal nut and washer for attachment.

Troubleshooting

This part works with the following brands:
  • Toro
  • Lawn Boy
This part works with the following products:
  • Lawn Mower
  • Lawn Tractor
  • Chainsaw
  • Snow Blower
  • Lawn Tractor Accessories
  • Engine
  • Cultivator
Part# 23-0660 replaces these:
23-0660,

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

Less than 15 mins 

(2 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Key was not fitting into ignition well.

David from Seneca Falls, New York

3 of 3 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Wrench (Adjustable)
Parts Used:
62-7770, 23-0660
Disconnected the negative battery cable. Used screwdriver to take off terminal plug off switch. Used crescent wrench to remove nut on ignition switch and removed. Put new switch in and tighten the nut. Replaced terminal plug on back of new switch. Reconnected battery cable. Put in new key and started machine. Every thing was fine.
Did you find this story helpful?
Thank you for voting!

Starter switch was damaged due to corrosion

Samuel from West Milford, New Jersey

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Wrench (Adjustable)
Parts Used:
23-0660
To Remove switch.
1. Disconnect the battery
2. Open the engine bay/ cover
3. Remove the switch harness/plug
4. Using an adjustable wrench remove the switch nut.

To install do a reversed process.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP9272049
Manufacturer Part Number: 23-0660
Brand Model Number Description
Toro 03410 Lawn Mower - 03410/Serial: 90240-90700
Toro 03410TE Lawn Mower - Reelmaster 216 2 Wheel Drive
Toro 03430 Lawn Mower - 03430/Serial: 40001-49999
Toro 04350 Lawn Mower - 04350/Serial: 90821-99999
Toro 04405 Lawn Mower - 04405/Serial: 30001-39999
Toro 04407 Lawn Mower - 04407/Serial: 40001-49999
Toro 04408 Lawn Mower - 04408/Serial: 50001-59999
Toro 04445 Lawn Mower - 04445/Serial: 70001-79999
Toro 04450 Lawn Mower - 04450/Serial: 40001-49999
Toro 04458 Lawn Mower - 04458/Serial: 60001-69999
Toro 04460 Chainsaw - 8-Blade Single Point Adjustment Cutting Unit
Toro 04465 Chainsaw - 11-Blade Single Point Adjust Reel Mower
Toro 04468 Lawn Mower - 04468/Serial: 210000001-210999999
Toro 08882 Lawn Mower - 08882/Serial: 20001-29999
Toro 08883 Lawn Mower - 08883/Serial: 40181-40699
Toro 09100 Engine - 09100/Serial: 70874-79999
Toro 09110 Engine - 09110/Serial: 50001-59999
Toro 18085 Lawn Mower - Lawn Mower
Toro 20058 Lawn Mower - Lawn Mower
Toro 20068 Lawn Mower - Lawn Mower
Toro 20076 Lawn Mower - Lawn Mower
Toro 20076A Lawn Mower - Lawn Mower
Toro 20200 Lawn Mower - 20200/Serial: 314000001-314999999
Toro 20440 Lawn Mower - Lawn Mower
Toro 20474 Lawn Mower - 20474/Serial: 5000001-5999999
Toro 20506 Lawn Mower - Lawn Mower
Toro 20517 Lawn Mower - Lawn Mower
Toro 20550 Lawn Mower - Lawn Mower
Toro 20562 Lawn Mower - Lawn Mower
Toro 20644 Lawn Mower - Lawn Mower