Part Location Diagram of 104-8676 Toro Brake Cable
See part G-1 in the diagram
( Grid squares measure 1x1 inch )

Brake Cable 104-8676

Manufactured by:
Toro
ERP Number:
ERP9256276
Part Number:
104-8676
Original Equipment Manufacturer ?
  Works with your model  20656!
In Stock
Delivers in 3-5 Business Days!

Easy 

15 - 30 mins 

(11 rated repairs) ?
  Works with your model   20656!

Product Description

?

This authentic replacement part is supplied by original equipment manufacturer for use on Toro walk behind lawn mowers. This cable consists of a metal wire cable with z-type bent ends and rubberized cover/body. The control cable stops the blade when the control handle is released on walk-behind mowers. If the cable is broken it will cause the brake to not release even when the lever is pressed. You may need pliers to complete this repair. • First you want to see where the old cable is attached to the motor assembly • Just remove the cable end there and install the new one • Now you can run the new cable up to the control handle • Then just as the old cable, put the z-shaped end through the hole in the control handle • Once both ends are attached, just push the upper mount assembly of the old cable out of the hole in the upper handle • Tie the cable in place just as the old one was, but leave enough clearance and free play to avoid over-bending and breaking the new cable

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Toro
This part works with the following products:
  • Lawn Mower

Customer Part Reviews

?
4.1
Average Rating (out of 5):
★★★★★
★★★★★
(7 Reviews)
Click to filter by ratings:
  • 5 stars
    5
  • 4 stars
    0
  • 3 stars
    0
  • 2 stars
    2
  • 1 star
    0
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

15 - 30 mins 

(11 rated repairs) ?
  • 1
  • 2
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Break cable broken

Anthony from Parma, Ohio

13 of 13 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
Parts Used:
104-8676
Removed the old cable and attached the new one. Perfect fit!
Did you find this story helpful?
Thank you for voting!

Cable brake broken.

Rob from Reno, Nevada

6 of 6 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Wrench set
Parts Used:
104-8676
Took the cord and the brake guide off. Unhooked the old cable the put the new one on. Reattached the guide.
Did you find this story helpful?
Thank you for voting!

Brake Cable assembly was broken at the handle

George from AZLE, Texas

3 of 3 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers
Parts Used:
104-8676
1. Removed brake cable at engine.
2. Attached the cable brake assembly at handle.
3. Tied down brake cable along handle with two nylon ties so brake cable would not protrude out.
Did you find this story helpful?
Thank you for voting!

Cable brake broken so mower wouldn\'t start

Jim from Pullman, Washington

3 of 3 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
Less than 15 mins
Tools:
Pliers
Parts Used:
104-8676
Connected the wrong end of the cable first after taking the broken cable off the engine. Once I figured out I needed to connect the handle end first and the cable to the engine second, all was good and the engine even started on the first pull. No excuse not to mow the lawn now!
Did you find this story helpful?
Thank you for voting!

Replace cable brake

mike from MONTPELIER, Idaho

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
104-8676
Take out old cable, just unhook from carburetor and where it hooks into handle and just replace it with the new one, very basic
Did you find this story helpful?
Thank you for voting!

The Lawn mower plastic piece was broke on the cable that started it.

Patricia from Tucson , Arizona

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
Parts Used:
491588B, 104-8676
I replaced the cable brake exactly as I took it off. It was simple. I replaced air filter too.
Did you find this story helpful?
Thank you for voting!

Cables were broken

Todd from Enterprise, Oregon

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Socket set, Wrench set
Parts Used:
104-8676, 105-1844
removed old cables by removing bolts that held them in place
installed new cables and replaced blots and nuts
Adjusted cable position as needed and tighten nut that held cable in place
Did you find this story helpful?
Thank you for voting!

Belt was shredded and wrapped around driveshaft. Also brake cable snapped at the handle

David from Swannanoa, North Carolina

0 of 1 people found this instruction helpful.
Difficulty Level:
Difficult
Total Repair Time:
30 - 60 mins
Tools:
Socket set, Wrench (Adjustable), Wrench set
Parts Used:
104-8676, 91-2258
Replaced brake cable because it broke off at the handle insert. Replace belt because it was pretty well shredded and wrapped around the drive shaft. Replaced air filter and spark plug. Now I HAVE A MOWER THATS LIKE BRAND NEW. What a great machine.
Did you find this story helpful?
Thank you for voting!

Brake cable broken

Joseph from ROCKTON, Illinois

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
Parts Used:
104-8676
Easy On and Off
Did you find this story helpful?
Thank you for voting!

Lawnmower brake cable frayed

Hubert from LITHONIA, Georgia

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Socket set, Wrench set
Remove old cable from throttle using needle nose pliers
Attached cable to brake bar
Attached cable to throttle
Did you find this story helpful?
Thank you for voting!
  • 1
  • 2

Model Cross Reference

This part works with the following models:
ERP Number: ERP9256276
Manufacturer Part Number: 104-8676
Brand Model Number Description
Toro 20013 Lawn Mower - Lawn Mower
Toro 20014 Lawn Mower - Lawn Mower
Toro 20017 Lawn Mower - Lawn Mower
Toro 20018 Lawn Mower - Lawn Mower
Toro 20031 Lawn Mower - Lawn Mower
Toro 20041 Lawn Mower - Lawn Mower
Toro 20049 Lawn Mower - Lawn Mower
Toro 20051 Lawn Mower - Lawn Mower
Toro 20066 Lawn Mower - Lawn Mower
Toro 20067 Lawn Mower - Lawn Mower
Toro 20070 Lawn Mower - Lawn Mower
Toro 20073 Lawn Mower - Lawn Mower
Toro 20073A Lawn Mower - Lawn Mower
Toro 20074 Lawn Mower - Lawn Mower
Toro 20074A Lawn Mower - Lawn Mower
Toro 20079 Lawn Mower - Lawn Mower
Toro 20089 Lawn Mower - Lawn Mower
Toro 20096 Lawn Mower - Lawn Mower
Toro 20098 Lawn Mower - Lawn Mower
Toro 20112 Lawn Mower - Lawn Mower
Toro 20113 Lawn Mower - Lawn Mower
Toro 20655 Lawn Mower - Lawn Mower
Toro 20656 Lawn Mower - Lawn Mower