This is a genuine OEM sourced lock nut designed for use with Toro snow blowers/throwers. It is a standard hardware which has multiple applications based on your unit. Please refer to diagrams for proper application. It is made out of metal and it is sold individually. You would need a wrench to tighten/loosen this nut.
The Toro 620 models shear pin are hard to replace. Once you get broken pin out you need to tape in the new bolt so when you turn the rotor to opposite side to but on nut with long nose pliers the bolts won\'t fall out. Long extended sockets needed on both nut and bolt end
Good luck
Snow blower has 2 separate augers attached to the auger shaft by a bolt and locking nut. I used a small piece of electrical tape to hold the bolt in place while I attached the nut from the opposite side of the shaft. Then I used two ratchets to hold one side while tightening other side, donGÇÖt forget to wear gloves.
Aligned the hole on the impeller shaft with the hole in the impeller and inserted the bolt, threaded the lock nut and lightly tightened the nut using a wrench and socket. I could not find the proper torque anywhere, so I simply snugged it up as t not apply any longitudinal stress on the shear bolt.
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP8953555
Manufacturer Part Number: 3296-42
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
(1979)_WW_7.gif "Part Location Diagram of 3296-42 Toro Nut-lock, Ni")
(1979)_WW_7.gif "Part Location Diagram of 3296-42 Toro Nut-lock, Ni")
