Part Location Diagram of 112-9989 Toro Shield-trailing
See part J-14 in the diagram
( Grid squares measure 1x1 inch )

Shield-trailing 112-9989

Manufactured by:
Toro
ERP Number:
ERP8845813
Part Number:
112-9989
Original Equipment Manufacturer ?
  Works with your model  22196!
$36.80
In Stock
Delivers in 3-5 Business Days!

A Bit Difficult 

30 - 60 mins 

(1 rated repair) ?
  Works with your model   22196!

Product Description

?

This is an authentic Toro replacement part that has been OEM sourced to be used with walk-behind lawnmowers. The durable plastic trailing shield attaches to the back of the mower's deck assembly. The trailing shield is used to prevent debris or clippings from escaping through the bottom of the rear of the deck. This item is sold as an individual replacement part.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Toro
  • Exmark
This part works with the following products:
  • Lawn Mower
Part# 112-9989 replaces these:
1-213255, 112-9989, 44-0580,

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

Be the first to ask our experts a question about this part!

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

A Bit Difficult 

30 - 60 mins 

(1 rated repair) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Trailing rubberized shield had broken off (31 years old!) leaving only a rubber sleeve over steel shaft.

Ken from Eden Prairie, Minnesota

5 of 5 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Socket set
Parts Used:
112-9989
1. Removed both rear tires.
2. Removed remaining rubber from mounting shaft on rightmost part of shaft using utility knife.
3. That allowed room to use vice grips to straighten end of mounting shaft.
4. But not straight enough, so put 5-pound sledge head under shaft as an anvil and hammered end so it was finally straight .
5. Slid off remaining rubber from shaft.
7. Slid on new trailing shield.
8. Used vice grips to bend end of mounting shaft upwards enough to keep shield from falling off.
9. Reinstalled both rear tires.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP8845813
Manufacturer Part Number: 112-9989
Brand Model Number Description
Toro 20030 Lawn Mower - Lawn Mower
Toro 20033 Lawn Mower - Lawn Mower
Toro 20036 Lawn Mower - Lawn Mower
Toro 20037 Lawn Mower - Lawn Mower
Toro 20038 Lawn Mower - Lawn Mower
Toro 20039 Lawn Mower - Lawn Mower
Toro 20040 Lawn Mower - Lawn Mower
Toro 20042 Lawn Mower - Lawn Mower
Toro 20043 Lawn Mower - Lawn Mower
Toro 20044 Lawn Mower - Lawn Mower
Toro 20045 Lawn Mower - Lawn Mower
Toro 20046 Lawn Mower - Lawn Mower
Toro 20048 Lawn Mower - Lawn Mower
Toro 20103 Lawn Mower - Lawn Mower
Toro 20106 Lawn Mower - Lawn Mower
Toro 20107 Lawn Mower - Lawn Mower
Toro 20210 Lawn Mower - Lawn Mower
Toro 20211 Lawn Mower - Lawn Mower
Toro 20214 Lawn Mower - Lawn Mower
Toro 20215 Lawn Mower - Lawn Mower
Toro 20216 Lawn Mower - Lawn Mower
Toro 20217 Lawn Mower - Lawn Mower
Toro 20218 Lawn Mower - Lawn Mower
Toro 20219 Lawn Mower - Lawn Mower
Toro 20320 Lawn Mower - Lawn Mower
Toro 20321 Lawn Mower - Lawn Mower
Toro 20322 Lawn Mower - Lawn Mower
Toro 20324 Lawn Mower - Lawn Mower
Toro 20325 Lawn Mower - Lawn Mower
Toro 20326 Lawn Mower - Lawn Mower