Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Solved a Six Year Old Problem
The part arrived as described. This assembly is a different design than the OEM part (same part number!), the result being the blade drive system on my 2013 (!!!) Toro 30" TimeMaster FINALLY works as the Engineer intended. I believe the OEM part was mis-manufactured, resulting in poor belt engagement (two-piece pulley). The replacement part has a ONE-PIECE pulley, with the correct diameter so the drive belt is fully taut when the clutch is engaged. WOO-HOO!!!
Guest - August 31, 2019
Verified Purchase
★★★★★
★★★★★
Right part
The right part but don't use Fed Ex for shipping. Too slow! Fed ex held the part IN TRANSIT for 7 days before shipping.
Guest - June 8, 2022
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Toro 30\" TimeMaster mower
Not for novice mower mechanic.
These instructions do not address the toothed blade drive/timing belt.
1. Remove plastic cover from blade drive system (4 screws at front of mower).
2. Disengage blade drive belt (non-toothed) from pulley-brake.
3. Remove nut/washer from pulley-brake (
... Read more3/4\" socket; your choice on how to prevent rotation of pulley during nut removal. Pay attention to how tight the nut is.).
4. Remove pulley-brake and install new one. Tighten nut; don\'t forget the washer.
5. Check condition of blade drive belt (non-toothed). If you\'re to the point of replacing the pulley, chances are the belt is shot. More steps are required to replace the belt, namely, getting the self-propel transmission drive belt out of the way so the blade drive belt can be replaced.
6. Engage the blade drive belt with the pulley-brake.
7. Check adjustment of the blade drive clutch. (With engine off and clutch disengaged, I adjusted the cable housing so that initial clutch handle movement resulted in immediate movement of the clutch pulley with no slack.)
8. Check function of all drive belts and the blade drive clutch:
- Engaging blade drive clutch results in taut drive belt with no slippage. (Check this with engine off first.)
- When running, releasing blade drive clutch results in blades slowed to a stop by the brake.
9. Reinstall plastic cover.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP16274181
Manufacturer Part Number: 130-6664
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_2.gif "Part Location Diagram of 130-6664 Toro Pulley-Brake, Spindle")
_WW_2.gif "Part Location Diagram of 130-6664 Toro Pulley-Brake, Spindle")
