This replacement ball bearing is an authentic OEM component which is designed for use with Murray and Snapper lawn and garden equipment. Bearings are utilized to reduce friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. Symptoms of failing bearing may include squealing, screeching, and an entirely new type of "grinding" (usually heard or felt as the motor powers-down). This high-quality component is made of durable metal and is sold as an individual part. A wrench set will be needed to perform this repair. Make sure to refer to the appropriate diagrams for your model to ensure the proper replacement procedure.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
edger parts
right part fit perfect but didn't have second part felt washer.
Guest - July 15, 2022
Verified Purchase
★★★★★
★★★★★
Finding older parts
Great to see a company that still carries parts for older machines that fit and work correctly also a fast delivery could not ask for better thanks again Kyle..
Guest - September 13, 2023
Verified Purchase
★★★★★
★★★★★
Need better diagram to choose parts
Its a perfect fit. Just was hard to find the pulley and rod.
Guest - July 5, 2023
Verified Purchase
★★★★★
★★★★★
the right parts
parts showed up in little time, and they fit my snowblower, back up and running.
Guest - February 10, 2021
Verified Purchase
★★★★★
★★★★★
Bearing for Snapper Mower
The parts were genuine and just what i wanted. The site claims same day shipping. It got labeled on the same day but sat at their location for most of a week. Finally received a week later. I would not order from this source again for that reaason.
Guest - September 19, 2019
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Snapper I522 Snowblower, was Name by the factory \"Snow King\". Auger bearings don\'t last over 5 seasons, or at least should be checked every 5th year, depending on location and the amount of snow you get. My snapper is a Old Unit, but well built back then to last. No rust, very little wear. Oil always changed every Fall. On these snowbl
... Read moreowers you have to remove both belts, which requires some tricky work, best to remove the belt pulleys and walk off the belts below on the two pulleys. Then split the box from the engine housing and pull that out to separate the unit. Once that\'s done remove the two pulleys, belts, and auger bearing and spacer. Reassemble those parts and place the two belts on the pulleys and slide the unit back together, having a helper keeping the belts on the pulleys, start two or three bolts to the box unit , Then before the rest of the bolts on the box unit install the belts on the two upper pulleys. Took me a few trys, but it is the only, easy way to install the belts. Once that\'s completed, install the rest, pulleys, and adjust the belts for the snow auger and drive traction. Once I figured that was the easiest way to remove and install and adjust it works great. Oh and the auger pulley has a rubber brake on a arm that stops the auger when not blowing snow, check that rubber brake pad, seems to be just a piece of 3/8\" rubber hose about 3/4\" in length. Done. Thank You.
I had to remove blade guard and blade itself spindle and all washers wipe off excess grease to expose bearings then put a long metal punch in the housing and start tapping with a rubber mallet on the bearings to remove them from the housing they are slightly pressed in so tap in different areas to get them to back out slowly once they st
... Read moreart backing out its not long before you get them outof the housing its always a good idea to take a picture of everything before removing so replacement is correct now put your new bearings and all housing parts in slowly according to how you remove them make sure to apply new grease into grease fitting before use
Read less
Did you find this story helpful?
Thank you for voting!
Broken pulley and bad bearings
Dennis from McPherson, Kansas
0 of 1 peoplefound this instruction helpful.
Difficulty Level:
Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
Had to split the snow blower to gain access to the broken pulley. Removed the pulley and replaced it with a new one. Also took and replaced two bearing that were worn. Works great now! Just hasnÆt snowed.
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP9295636
Manufacturer Part Number: 7010756YP
Lawn Tractor
- 25" 6 Hp Rear Engine Rider Series 4
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
