This is a genuine OEM sourced replacement part designed for use with riding lawn mowers/tractors. This boot protects the rear axle from dust, dirt and debris. It is made out of plastic and it is sold individually. Please note clamps that secure this boot are sold separately. You will need a set of wrenches and a screwdriver to complete this repair.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Everything worked out really good
hello , I`m sorry to be so late in answering ,but , I wanted to send a couple of pictures and the thing that lets you put them on the computer didn`t work.. I especially wish to thank the lady that helped me order this as we could not order it the normal way there was some glitch that didn't work... THANK YOU VERY MUCH
Norm
Iglobal - July 3, 2021
Verified Purchase
★★★★★
★★★★★
Snapper axle boot replacement
The products were exactly like what was advertised. They fit well with no modifications. Very good products and very good folks to do business with. I would recommend them to anyone.
Guest - August 29, 2023
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Watched you tube for my model lawn mower. The video gave complete instructions. Stood mower on end took off tire and all other parts per instructions. Everything came off and went back on in reverse order.
Did you find this story helpful?
Thank you for voting!
Mower would jam in reverse and had rough spot going forward
Larry from Boise, Idaho
3 of 3 peoplefound this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
It is really a very simple job if everything goes right, but my axle spindle was seized on the axle so I had to heat it up with torch and use air chisel to remove it.
After that everything went together fine.
I disconnected the old cable with the broken part and then installed the new cable. Since my Snapper is designed to be stood on end, accessing the repair area was easier than with other mowers. The axel boots required removing the left wheel and I don\'t have a puller to do that so I cheated and slit the boots to put them on. Tightened
... Read more the clamps and now the axle is mostly covered from debris.
Noticed the axle boots broken, so I felt the problem mite be that dirt was causing the extra strain on shift handle. Replaced the parts that I got from ereplacementparts. All fit perfect and now it shifts and drives great. Thanks
Did you find this story helpful?
Thank you for voting!
Parts worn or broken.
Timothy from HARVEY, Louisiana
0 of 1 peoplefound this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
Tipped the machine up on the back bumper stands. Removed the rear tires and left hand fender from the lawn tractor.
Removed old cables and replaced with the new ones.
Cleaned parts that was going to be reused.
Cleaned and Greased the rear axe before installing the new rubber protective boots on the rear axel.
Re-a
... Read moressembled the rear axel assembly. I had to add nylon
shims to take up the slop between the rear axel and the
left hand tire bushing bearing prior to installing the left hand fender and tires.
Adjusted the chain case and brake cables as required.
Test ran the tractor after the repairs were made.
All pats fit and performed great. Tractor is running good !
Read less
Did you find this story helpful?
Thank you for voting!
bolts that hold gears in transmission fell out
jim from ALLIANCE, Nebraska
0 of 1 peoplefound this instruction helpful.
Difficulty Level:
Difficult
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
Lawn Tractor
- 25" 6 Hp Rear Engine Rider Series 6
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Cap or Lid","title":"Cap or Lid","url":"/parts/lawn-and-garden/lawn-mower/caps-and-lids/"},{"position":2,"name":"7075115YP","title":"7075115YP","url":""}]
