This is a genuine manufacturer-sourced part which is designed for use with Murray and Snapper lawn mowers. The clutch cable engages the blades. It is an identical replacement for a faulty or a missing cable that was installed on a new unit. Please make sure to check the appropriate diagrams for your model for the correct repair procedure of this part. Keep in mind this high-quality rubber insulated clutch cable is sold individually. You may need a screwdriver and pliers to replace this component.
Troubleshooting
This part works with the following brands:
Snapper
Craftsman
Murray
Briggs and Stratton
This part works with the following products:
Lawn Mower
Lawn Tractor
Part# 7022449YP replaces these:
7022449YP,
★
Customer Part Reviews
?
5.0
Average Rating (out of 5):
★★★★★
★★★★★
(4 Reviews)
Click to filter by ratings:
5 stars
4
4 stars
0
3 stars
0
2 stars
0
1 star
0
< Prev
1
Next >
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Correct Cable, reasonable price
Great place to order parts. Pricing is fair and shipping is reasonable given the challenges our country is facing at this time.
Peter - July 23, 2020
Verified Purchase
★★★★★
★★★★★
Great part
Part arrived quickly and was a perfect fit. My lawnmower now works perfect. Thanks for the excellent service.
Gary - September 8, 2021
Verified Purchase
★★★★★
★★★★★
great fit and works perfect as good as new
arrived quickly and great customer service completely satisfied
Guest - May 18, 2022
Verified Purchase
★★★★★
★★★★★
Happy, right part worked=ƒæì
Good condition
Guest - May 22, 2023
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
The old cable is easy to replace. I slid the old cable out from the clutch pedal(easy) and fed it through to the back. I had to unscrew the brake cable which is connected to the clutch cable under the drivers seat. The back end of the cable also slides out through a groove (similar to the front end) on a plate near the clutch. so, other t
... Read morehan removing and replacing the brake cable there was no need for tools. I did stand the mower up on its back end to do this repair. putting the new cable in was a snap. thus, Snapper.
Disconnect the cable from the foot pedal, disconnect the cable from the rear end by using a screw driver to push the clutch in from access hole in rear of tractor. Disconnect by hand them pull out cable from pedal side. Run new cable from mid access hole to front then to rear. Attach to foot pedal then to clutch. You also have to disconne
... Read morect at the mid point the lead connector that allows the brake cable to engage. Then reconnect after cable is installed. Takes less then 30 minutes total.
The cable fit fine. Unfortunately, I ran the cable wrong on the bottom (when the mower was on it\'s back). Then, I had to disconnect it at the top in order to reroute the cable. It should have gone quickly, however, I made it a little more difficult.
Did you find this story helpful?
Thank you for voting!
Broken cable from brake/clutch pedal in front to clutch and brakes in rear of rider-mower
After ten years of use, the cable broke at the foot pedal due to bending whenever the foot pedal was pressed down to stop the Snapper rider-mower. The five parts purchased together form part of a single system, however it would have been possible to purchase only the \"Cable, Clutch\" while salvaging and re-using the brake cable and othe
... Read morer parts. After studying how the original clutch cable and brake cable were attached, it was not difficult to connect the replacement cables properly. I needed a second pair of hands to keep the front end of the cable from slipping down into and becoming lost in the connecting tube while I connected everything at the rear of the mower. Otherwise, this was a one-person job.
Removed old clutch cable
Drained gas
REMOVED BATTERY (spilled some battery acid, not good)
raised mower on back rests
install new cable at clutch end (very tight space) kept at it until end was installed.
Adjusted cable at pedal end by moving forules (sp) to behind pedal
Let mower down
Worked fine
... Read more.
Read less
Did you find this story helpful?
Thank you for voting!
Parts worn or broken.
Timothy from HARVEY, Louisiana
0 of 1 peoplefound this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
Tipped the machine up on the back bumper stands. Removed the rear tires and left hand fender from the lawn tractor.
Removed old cables and replaced with the new ones.
Cleaned parts that was going to be reused.
Cleaned and Greased the rear axe before installing the new rubber protective boots on the rear axel.
Re-a
... Read moressembled the rear axel assembly. I had to add nylon
shims to take up the slop between the rear axel and the
left hand tire bushing bearing prior to installing the left hand fender and tires.
Adjusted the chain case and brake cables as required.
Test ran the tractor after the repairs were made.
All pats fit and performed great. Tractor is running good !
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP9070755
Manufacturer Part Number: 7022449YP
Lawn Tractor
- 28" 13 Hp Rear Engine Rider Series 23
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
