This genuine wheel and tire assembly is supplied directly from original equipment manufacturer. It is specially produced for use with Snapper mowers. This is the front wheel that supports the mower. Please note, the rear wheels are different and they are sold separately. This assembly includes one (1) metal rim and one (1) rubber tire. To replace this wheel you would need a wrench. • Remove the cap/plug and the locknut • Replace the old wheel with the new one • Secure the locknut and the hub cap
These wheels are a good replacement for the original plastic wheels. Word to the wise: you do not need the bushings with these new wheels, they have bearings and fit the axle without bushings.
1. Raise the mower body to get the wheels off the ground during the repair.
2. Remove the plastic protective covers from each wheel.
3. Front wheels - Remove the retaining nut from each wheel using a 1/2 inch wrench on the inside and a 1/2 inch socket on the retaining nut.
4. Install the new wheels using the same nuts an
... Read mored washers.
5. Rear wheels - Same procedure as with the front wheels excepting it is necessary to clamp the axle with a vise grip plier while removing the retaining nuts.
One of the front wheel bearings wore out. I then discovered that the axel was also worn so that it was no longer stationary but turning. I replaced the axel, both front wheels and the left and right axel holders. The repair has worked wonderfully. The parts for my mower were no longer available so I used parts from a new model mower. They
... Read more worked well. Snapper evidently changed from a 1/2-inch diameter axel to 11mm, making the older parts obsolete.
Removed the nut that holds the wheel on the shaft, then removed the wheel. Slid the new wheel on the shaft and tightened the nut. Did the same for the other side.
Removed affected wheels.
Replaced axle bushing on one wheel and reinstalled.
Replaced other damaged wheel. Replacement wheel unlike original - had to acquire and install additional washers for proper clearance.
Back in business...
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP18605992
Manufacturer Part Number: 7035727YP
Lawn Mower
- Snapper Lawn Mower Model 7080355 Parts
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Wheel or Roller","title":"Wheel or Roller","url":"/parts/lawn-and-garden/lawn-mower/wheels-and-rollers/"},{"position":2,"name":"7035727YP","title":"7035727YP","url":""}]
_WW_9.gif "Part Location Diagram of 7035727YP Murray WHEEL, GRAY")
_WW_9.gif "Part Location Diagram of 7035727YP Murray WHEEL, GRAY")
