This is a genuine Snapper replacement part that has been sourced from the original manufacturer to be used with walk-behind lawnmowers. The idler pulley attaches to the idler clutch arm and is used to engage the drive belt. The idler pulley is priced as a single item.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Parts
All parts were ordered easily on the internet, but could not find an engine drive belt from the pictures. I called in and spoke with Jennifer who found the belt I needed placed the order quickly and I was finished. This is where I continue to get my mower parts because they are efficient!
Guest - July 15, 2019
Verified Purchase
★★★★★
★★★★★
Idler pulley replacement
Received part 1 day ahead of scheduled delivery, great replacement part perfect fit.
Charles - June 6, 2020
Verified Purchase
★★★★★
★★★★★
You Can't go Wrong ! !!
I was thrilled to find my 30 year-old equipment was still supported ! The right parts, at the right price. Easy, secure check-out, prompt delivery. Would recommend & will use again
Guest - June 30, 2020
Verified Purchase
★★★★★
★★★★★
Part was what i needed!
Pulley was exactly what I needed to replace a frozen one I had on a used Snapper mower that had not been used for a long time!
William - November 26, 2020
Verified Purchase
★★★★★
★★★★★
Wrong part to small
I cannot use this they are to small and not the right part
Guest - July 12, 2020
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
I removed the blade and clutch pack to replace the main drive belt. The rest of the drive system was easy , i just had to remove one wheel to get to the rest of the system. The replacement parts are good quality. Hopefully they well last 43 years like the originals I replaced on my 1974 Snapper 21 with Wisconsin Robins engine
Did you find this story helpful?
Thank you for voting!
Yearly maintance.
Gary from Algona, Washington
2 of 2 peoplefound this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
More than 2 hours
Tools:
Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
Removed lawn mower blade to get remove old belt and replace with new one.
Removed spring from Idler Pulley mount, and replaced idler pulley, and connected new belt.
Disconnected drive shaft on one side and removed old belt and replaced with new belt.
Tightened all the bolts and reconnected tension springs.
Job comp
... Read moreleted in approx. 15 minutes.
Removed Blade inserted bolt through top of mower deck then tightened nut. Next using pliers bent the retaining spring in place with the \"U\" hook latching onto the opening where the belt comes through. Old Snapper Self Propelled mower V212P4.
Removed old belt, shift linkage, and dis-assembled top Hub Assembly
Removed lower Drive Disc assembly- needed special wrench- a 7/8\" flat (or pump) open-end wrench, to hold the flats on the bushing, close clearance between Drive Disk and Idler Arm, to remove the nut ( under deck)
Removed the old Hex Shaft.
Installed new
... Read more belt (remove blade, for access)
Replaced lower Drive Disc, and installed tension spring.
Installed new Hex Shaft
Replaced Hub assembly, and installed tension spring.
Replaced shift linkage
Test drive !!
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP18603544
Manufacturer Part Number: 7012124YP
Lawn Mower
- 21" 4 Hp Steel Deck Experimental Bbc Series Y
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
