An authentic OEM sourced replacement part which is specially produced for use with Murray walk-behind lawn mowers. This is the main drive belt of the unit, over time belts tend to wear out and stretch eventually requiring a replacement to maintain peak performance. Keep in mind this high-quality component is made of durable rubber material and is sold individually.
1. Removed belt protective cover.
2. Determined that the front axle needed to be shifted out of the way so the belt could be placed over the pulley on the front axle.
3. Removed front wheels, gear guards and sheer pins on axle so axle could be moved enough to place the belt over the axle pulley.
4. Inserted belt over a
... Read morexle pulley.
5. Moved axle back into place.
6. Replaced sheer pins, axle gears that form the end of the axle under the wheels.
7. Replaced gear protective covers.
8. Placed belt over rest of pulleys.
9. Replaced belt protective cover.
1 - Remove the three screws and drive belt cover
2 - Remove the front wheel mount on the same side as the belt cover
3 - Push the belt down through the deck, and around the end of the drive shaft, onto the pulley
4 - Thread the belt over the drive pulley and tensioning pulleys
5 - Reattach the front wheel mount ass
... Read moreembly
6 - Reattach the belt drive cover
Read less
Did you find this story helpful?
Thank you for voting!
Power drive for front wheels stopped working/belt broke
Removed the cover for the belt
Took off the wheel mount
Installed the belt onto the pulley on the drive shaft
Installed the belt on the remaining pulleys
Put on the wheel mount
Screwed on the belt cover
My son had already tried to repair this, but he had the incorrect belt and didn\'t have the idler pulley.
1, removed Belt - need to take off cover over belt and remove one wheel and slide axel to complete the belt removal
2. replace belt - reverse of step 1 less replacing the cover.
3. replace idler pulleys (2) - socket
... Read moreand wrench remove mounting bolt, take off old pulley, replace with new pulley, and tighten mounting bolts
4. Had to determine how belt had to be placed regarding upper idler pulley (on top or on bottom of pulley) - Assembly diagram doesn\'t show belt path so I guessed and I was wrong. So I had to correct belt path.
5. Replace cover and the job was complete.
Due to the belt being new, it took a little while for the belt to stretch out and not drive the wheels when the drive wasn\'t engaged. This was about 2 hours of operation.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP8960469
Manufacturer Part Number: 37X100MA
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_1.gif "Part Location Diagram of 37X100MA Murray Belt(22sd B&s)&(22rb")
_WW_1.gif "Part Location Diagram of 37X100MA Murray Belt(22sd B&s)&(22rb")
