It is a genuine manufacturer-sourced replacement part which is specially designed for use with walk-behind lawn mowers. The adapter fits the blade and allows a user to connect it to the spindle. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality part is made of durable metal and is sold individually.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Perfect Fit
Way to use website, the part was a perfect fit and easy tie install. Part got here really fast. I am up and running again.
Guest - May 27, 2019
Verified Purchase
★★★★★
★★★★★
Excellent service
Service was excellent and part was exact replacement of original
Guest - June 3, 2019
Verified Purchase
★★★★★
★★★★★
Fast and accurate
Tried other sites and received the wrong part. eReplacement got it right the first time.
Guest - June 14, 2019
Verified Purchase
★★★★★
★★★★★
Excellent fit. good quality
This was a snug fit, but easy to do. Just tapped the part on the motor shaft with a small rubber mallet.
Guest - July 22, 2020
Verified Purchase
★★★★★
★★★★★
Very Easy Repair especially when you have the right part
It fit perfectly and was exactly as described. The lawn mower is now back up and running.
Guest - May 9, 2019
Verified Purchase
★★★★★
★★★★★
Lawn mower part
The piece is working fine. Very happy.
Guest - June 8, 2022
Verified Purchase
★★★★★
★★★★★
Blade adapter
Part fits fine. Great experience with prompt delivery.
Guest - July 12, 2022
Verified Purchase
★★★★★
★★★★★
Perfect port replacement
The perfect replacement part for my lawnmower. They had the product which was exactly what I needed according to my part manual for my mower. It arrived extremely quickly and was exactly what I needed. Once again ereplacementparts.com has come through and done a perfect job for me. Thank you
Guest - October 4, 2022
Verified Purchase
★★★★★
★★★★★
Lawn mower part.
Wes the right part, and was here within a weeks time.
Tammy - July 12, 2023
Verified Purchase
★★★★★
★★★★★
WORKED AS EXPECTED
PART WAS CORRECT , AND ARRIVED IN A REASONABLE TIME FRAME .
Guest - August 5, 2025
Verified Purchase
< Prev
1
2
Next >
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Remove the blade bolt and the blade support then the blade. Remove the blade adapter. Install the new adapter, lining up the key with the keyway in the shaft. Install the blade, blade support and the new blade bolt
Remove the blade bolt and blade support then the blade. I had to tap the adapter with a mallet to remove it from the shaft. Clean the shaft off. Place the adapter so that the key inside of it lines up with the key way in the engine shaft, then give it a little tap with the mallet. Attach the blade and the blade support, then tighten the b
... Read morelade bolt. Finished.
Read less
Did you find this story helpful?
Thank you for voting!
Blade adapter broke after hitting immovable object.
1. Remove blade bolt and blade.
2. Remove broken adapter.
3. Place new adapter over engine shaft and bump until seated with palm of hand.
4 Reinstall blade, crush washer, and bolt.
Lubricated adapter a little and slid it on engine shaft . Then I placed the blade and lock plate on adapter, started the bolt and tightened with ratchet and socket.
Did you find this story helpful?
Thank you for voting!
Blade to shaft adapter was broken. I suspect a blade strike.
1. The blade was removed by placing vice grip pliers to the frame to act as a stop. A socket was used with a cheater bar to remove the nut holding the blade assembly. The bent blade was discarded.
2. The new adapter was placed on the shaft, however, the shat was 1.0625\" in diameter with a straight notch. The new adapter was
... Read moreapproximately 1.025\" with a notch with edges. The edges had to be removed and the interior diameter was filed.
3. The new adapter was then installed with a small sledge to force it into place. A new blade with then installed.
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
