This control cable is specially designed for use with walk-behind lawn mowers. It is supplied by the original equipment manufacturer. The cable is utilized to engage the blade. This part is connected to the control handle, over time it may wear out or get damaged eventually requiring a replacement. Refer to the owners manual and the appropriate diagrams of your model for the exact location and the correct installation. One durable rubber insulated cable is included. You may need pliers and a screwdriver to disconnect the old part and attach the new one.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Exactly what I ordered.
Fit perfectly.
Guest - April 19, 2019
Verified Purchase
★★★★★
★★★★★
Easy repair
Fit perfectly
Guest - April 30, 2019
Verified Purchase
★★★★★
★★★★★
Craftsmen Mower Repair
Your website made it very easy to identify what I needed for this project. From my original manual, I quickly identified the clutch and blade control cables I needed. Once they arrived the install was easy. High quality parts. Thank You!
Steven - May 31, 2019
Verified Purchase
★★★★★
★★★★★
Just right part
Works as described. Put vicegrip away! Great place for the right parts.
Philip - June 17, 2019
Verified Purchase
★★★★★
★★★★★
Throttle cable
Cable functioned as advertised, was easy to install and made with quality material.
Dave - November 9, 2019
Verified Purchase
★★★★★
★★★★★
Just what I needed!
Needed cable for my lawnmower, it was in stock, quick delivery and it's up and running again!
Guest - February 5, 2020
Verified Purchase
★★★★★
★★★★★
DYI
The part was easy to find on the site. It came quickly and the DYI repair saved us a lot of money! Not today, lawnmower repair shop! Not today!!=ƒÿè
Guest - February 10, 2020
Verified Purchase
★★★★★
★★★★★
Wrong part,,but—-
Part was fine, but it wasn’t the one for my mower. The problem is in the parts diagrams. I probably should have called for help because the diagrams were not clear enough to actually see what I was getting.
Guest - June 15, 2020
Verified Purchase
★★★★★
★★★★★
Easy repair
Good Quality product fits and works like the original. Thanks!
Elbert - March 22, 2023
Verified Purchase
★★★★★
★★★★★
control cable
we got the right part
Guest - April 29, 2023
Verified Purchase
< Prev
1
2
Next >
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Used a pair of pliers to compress the plastic locking tabs on both ends of the old cable, so the retainers could be extracted from the keepers. Fed the new cable ends into the hole in the handle mounted actuator bar and the engine operational lever and seated the snap in plastic connectors on the ends of the outer cable into the holders.
... Read more Entire job took about five minutes and the new cable worked perfectly. An amazingly simple and successful repair!
Disconnect the cable from the bail on the handle. Use pliers to take cable off bracket, and remove from engine. Connect the new cable to the hooks on the handle. Insert the bent end of the cable to the engine, and snap into plastic bracket. Connect the other end of the cable to the bail on the handle.
1. Removed the drive cover on the front.
2. Removed the small cover at the pull handle.
3. Removed the broken cable.
4. Cut the wire tie on the handle holding the cable.
5. Replaced the old cable with the new cable.
6. Reconnected the small cover.
7. Reconnected the drive cover with two shoulder screws.
... Read more
I noted how the old cable was hooked up to the mower. Then I removed one end of the old cable and inserted the new cable end, I did the same with the other end. Easy
1. Removed front wheels and replace with new wheels.
2. Removed nut and replaced with star knobs.
3. Removed old control cable and replaced with new cable.
The ends of the cable were rotated to allow removal from the engine and bail. The plastic mounts were squeezed to facilitate removal from the handle. The new control was installed and secured with zip ties. The product from replacement parts was correct and allows the operator presence safety feature to engage to pull the crank rope. The
... Read moretutorial video was helpful.
My initial contact was with the manufacturer who had the product on back order. I was pleased to find a source to fulfill my order with a good price, quickly.
Removed cowl cover
Remove air cleaner and bracket
Removed fuel line and plugged off end
Removed spring on governor
Removed linkage from carb
Remove carb screws and carb
Disassemble carb and clean with carb cleaner and low spray of air
Assemble carb and install
Replace all pieces in the rev
... Read moreerse order
Clean fuel tank and add new fuel
Start mower and let run
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP16463810
Manufacturer Part Number: 946-1113A
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_2.gif "Part Location Diagram of 946-1113A MTD Cable")
_WW_2.gif "Part Location Diagram of 946-1113A MTD Cable")
