This front height adjuster plate is sourced directly from the original equipment manufacturer. It is specially designed for use with push lawn mowers. The part allows a user to adjust the height of the unit. Over time it may wear out or get damaged eventually requiring a replacement. It is made of high-quality metal and is sold individually. Check the diagrams of your model for the exact location and the correct installation of the new part. You will need a wrench to remove and secure the hardware that holds the adjuster plate to the mower.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Great part -works great
The part was delivered as promised. It fit exactly. Thank you for your service. Plan to order parts again in the future. Thanks!
Guest - September 10, 2019
Verified Purchase
★★★★★
★★★★★
Perfect part and so easy to order!
My mower is about 6 years old, but the engine still runs great. The front height adjuster plate and axle holder had worn and no longer held the wheel at the proper height. I came to this website looking for parts and was able to find the correct parts easily. I love how the schematic for my mower popped up and all you had to do was point to the part and click to order it, especially since I had no idea what the proper names for them were. I was able to replace the worn parts quickly and my mower is working great.
Alex - October 11, 2019
Verified Purchase
★★★★★
★★★★★
eReplacement had the parts I needed
eReplacement had the parts I needed For my Troy Built mower. (Front clip, adjuster plate, and necessary screws). Easy to find, and order. Reasonable price, arrived within a week. Parts were quality and easy to install. I was up and running again before the grass was too long!!!
Guest - March 17, 2020
Verified Purchase
★★★★★
★★★★★
Will work when I install it.
I usually have to replace these every couple of years. It's been a little while so I ordered it while I was ordering something else for the mower so I'd have it on hand next time i have to replace it. If I can remember where I put it.
Guest - May 14, 2020
Verified Purchase
★★★★★
★★★★★
Exactly what I needed.
It's never easy finding parts for an old machine, but this site made it possible. I like the find part by symptom feature. It was just another way to be comfortable that I was purchasing the right thing.
Guest - June 2, 2020
Verified Purchase
★★★★★
★★★★★
Easy fix, worked as expected.
Arrived on time, great packing. Very pleased.
Guest - August 25, 2020
Verified Purchase
★★★★★
★★★★★
5 min Install
Part came quick, and was an exact match of the original. Super easy install.
Guest - December 12, 2020
Verified Purchase
★★★★★
★★★★★
Worked Perfectly
Perfect fit for my mower.
Emanuel - September 18, 2021
Verified Purchase
★★★★★
★★★★★
Lawn mower front height adjustment plate
The park was the one I needed. It was delivered timely and my lawn mower is now fixed.
Guest - May 31, 2022
Verified Purchase
★★★★★
★★★★★
fit great
built well fit perfect
Guest - May 8, 2023
Verified Purchase
< Prev
1
2
Next >
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Easy
15 - 30 mins
(25 rated repairs)?
< Prev
1
2
3
Next >
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Part of the plastic axle mount in the front cover failed, so the front wheels would not maintain a consistent cutting height. The adjuster plate and lever (part of the axle assembly) had become somewh
1. The blade was a simple 1-bolt mount. Removed and replaced.
2. The front cover is held on by 5 or 6 self-tapping screws, easily removed once found.
3. Wheel covers pry of with any flat blade; wheels are single bolt, easily removed.
4. Old adjuster plate screws were removed to reuse in new assembly. Old adjuster lever k
... Read morenob pried off for reuse as well.
5. New adjuster plate screwed onto front cover.
6. Old wheels and wheel covers attached to new axle assembly.
7. Axle assembly \'snapped\' into front cover.
8. Front cover reattached to mower deck using original screws.
9. Adjuster knob snapped on.
Everything aligned perfectly. No adjustments required.
1. Removed right front wheel with socket wrench. 2. Removed the worn out height adjustment plate with nut driver. 3. Replaced the worn out height adjustment plate with the new one. 4.Replaced
... Read more the right front wheel. 5. After getting a quote from a lawn mower repair shop for $70 + dollars , I decided to look into this repair. The replacement part was exact and fit like a glove. Should anything else break or wear out , IÆll definitely be back !!! Thank you ô eReplacementParts.com
Read less
Did you find this story helpful?
Thank you for voting!
My mower broke the hieght adjuster and I lost one of my wing nuts from all the vibation.
I replaced the front axle and the height adjuster. Replaced the wing nut and the discharge chute. I propped the mower up and removed the wheels. Then, removed the axle and the height adjuster. Then, replaced all parts.
Remove 5 bolts from deck
Install new adjuster plate on new front cover
Install assembly on front of mower
If you do this repair replace the 5 bolts that hold the assembly they will be rounded off from normal wear under the deck
Undo the five 10mm bolts holding the front end. Remove the front end. Undo the two 10mm bolts securing the height adjustment plate. Pry the front axle out of its retaining clips with a flat head screwdriver.
Reuse bolts to fasten new height adjustment plate to new front end. Reuse five bolts to fasten front end onto lawnmowe
... Read morer housing. Align and slap axle into retaining clips.
Troy-Bilt black plastic nose guard that holds axle broke off at axle connection.
Removed and replaced front plastic guard, and replaced front axle as well.
Snap out axle, remove front guard held on with 6 screws. Install new guard.
Install new height adjuster plate on new guard. Remove wheels from old axle and put them
... Read moreon the new one. Snap front axle into new guard. It was not a difficult job, and well worth the cost of the parts. Now have a new front end ( except for the wheels ).
Removed both adjustment plate and front axle assembly and replaced both
with brand new parts. Once I got them apart I figured out how easy it would
be to fix the problem by buying the replacement parts. It wasn\'t any problem
1. Removed old front cover (5 screws)
2. Removed axel from old cover.
3. Removed old height adjuster plate (2 screws)
4. Put on new height adjuster plate (2 screws)
5. Snapped axel into new front cover
6. Re-atttached front cover (5 screws).
Note: mower needs to be on its side. It\'s helpful to p
... Read morerop it well so front wheel is off the ground, otherwise, the front cover will be more difficult to remove. With the wheel off the ground, the mower will be more unstable. I placed some bricks under the engine to keep it in place. Probably 30 minutes or so to complete. Someone handier than I am may be faster.
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_8.gif "Part Location Diagram of 787-01818A-0637 Husky Front Height Adjuster Plate")
_WW_8.gif "Part Location Diagram of 787-01818A-0637 Husky Front Height Adjuster Plate")
