This is a genuine manufacturer-sourced part which is specially designed for use with Craftsman Lawn Tractors and Riding Mowers. The Drive pulley attaches to the transmission and drives the transmission shaft to move the tractor. The drive pulley is sold individually. Tools you will need for this repair are Socket set, Wrench Set, and an Adjustable Wrench.
Put new pulley on, put new blades on, greased all fittings,, attached deck with pins, put on main mower belt, level mower, and was cutting grass in a couple hours,,,all the parts matched up great!
Did you find this story helpful?
Thank you for voting!
Pulley was stripped and no longer spinning blade with power
1. Removed blade
2. Removed plastic pulley cover
3. Loosened serpentine belt system
4. Removed pulley nut and removed pulley
5. Removed the 4 bolts holding the mandrel assembly.
6. Do every step backwards to put it all back together.
The mandrel Bearings were worn out after 13 years of service, one driven pulley had spun out on the mandrel shaft,and the deck best needed to be changed out due to wear
I placed the mower in my garage where i could draine the oil from the engine, before i proceded to to lift the the mower @ the front wheels frame assembly to access and remove the Blades and the old belt. then i used my impace driver to remove the retaining nut from the old mandrels,then i remove all the bolts from the mandrels, the bolt
... Read mores were all self tapping and all twister off due to age. then when all the old parts were removed, i cleaned the deck to remove the debre.Note: i did not order the self tapping bolts for the mandrel replacement,i intendes to drill out the holes in the mandrels to accept a 5/16 x 2\" grade 3 or 5 with flat and lock washers works well for this, then i bolted on the new manderls and tightened to required torque,then re place the already sharpened blades, and tightened to required torque.next i install the drive pullies and torqued to spect,then install the the deck belt and applied the tention to the belt, i did not have to use the idler spindle mine was still in good shape due to propre lubercation, next i lowered the mower and changed the oil, Att: don\'t forget to turn off your gas before you lift your mower from the front end the gas may run into the engine while standing up if you lift from the front end. Clip
I have a Craftsman GT 5000 that I purchased new in 2003. Deck was in need of help. Replaced all moving parts of the deck including new blades. Ordered all parts from replacement. All parts fit with no problems. Mower mows just like new and quiet.
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP9014131
Manufacturer Part Number: 532174375
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
