This nylon-insert flange nut is designed for use on outdoor power equipment to securely fasten components exposed to vibration and torque. The built-in flange helps distribute load evenly without the need for a separate washer, while the nylock insert resists loosening during operation. It’s a simple, reliable replacement for maintaining safety, stability, and secure assembly across a wide range of equipment.
I removed the auger housing assembly from the motor/pulley assembly. Removed the auger assembly from the auger housing, disassembled the augers from the auger axle and gear assembly, the sheer bolts broke off in the disassembly, as they are designed to do. Drilled out the broken sheer bolts from the augers and auger drive shaft. I disasse
... Read morembled the snowdrift cutters and various support parts from the auger housing. I used naval jelly to treat the rusted parts, basically the outer housing of the snowblower motor assembly, the augers, the entire auger housing, the snowdrift cutters and sundry parts of the auger housing. I then used a grinder and a poly paint removal grinder wheel to clear loose paint and rust off the outer housing of the snowblower motor assembly, the augers, the entire auger housing, the snowdrift cutters and sundry parts of the auger housing. I cleaned everything with mineral spirits and soap and water. Repainted all the parts with Rustoleum yellow or black enamel, where appropriate. I cleaned the snow deflector angle cable with WD40 and greased it with automatic transmission fluid, which was light enough to lube the cable without freezing in winter. Reassembled it all with new skid plates, new sheer bolts, a new auger shaft bearing and new click pins and tested it to make sure it still ran and functioned properly.
It all took several weeks but considering the cost of a new snowblower of this quality, and the effort to hand shovel a 75 foot drive every dang day next winter, it was worth it.
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
