Close
Phone 1-855-343-0069
Cart
Official OEM Guarantee
Fast shipping from USA
365 Day Returns
Preferred Brand Partners
16360209-1-M-Husqvarna-532403457-Complete Bracket Assembly
Part Location Diagram of 532403457 Husqvarna Complete Bracket Assembly
See part A-35 in the diagram
( Grid squares measure 1x1 inch )
16360209-1-S-Husqvarna-532403457-Complete Bracket Assembly Part Location Diagram of 532403457 Husqvarna Complete Bracket Assembly

Complete Bracket Assembly 532403457

Manufactured by:
Husqvarna
ERP Number:
ERP16360209
Part Number:
532403457
Original Equipment Manufacturer ?
  Works with your model  WM45N22SA!
$14.87
Special Order

Easy 

15 - 30 mins 

(10 rated repairs) ?
  Works with your model   WM45N22SA!

Jump to:

Description Troubleshooting Questions & Answers Repair Instructions Model Cross Reference

Product Description

?

The right handle wheel bracket support fits between the lower handle and the front selector spring. This is an authentic replacement part used in compatible lawn mowers made by Weed Eater, Poulan, and Husqvarna. This item is made out of metal and is available as an individual replacement part. When replacing this part a wrench set and a socket set may be needed.

Troubleshooting

This part works with the following brands:
  • Craftsman
  • Husqvarna
  • Weed Eater
  • Poulan
This part works with the following products:
  • Lawn Mower
  • Lawn Tractor
Part# 532403457 replaces these:
532400782, 532403457,

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

15 - 30 mins 

(10 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Wheel bracket supports were broken.

Frank from Kingsport, Tennessee

3 of 3 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set, Wrench set
Parts Used:
532403457, 532403456
The ears that hold the wheel bracket supports in place had broken off allowing the handle to fall all the way to the ground. Removed the wheel then the bolt that held the wheel bracket supports in place. Put the new wheel bracket in place and bolted. Then reinstalled the wheel. Piece of cake. Took about 20 minutes.
Did you find this story helpful?
Thank you for voting!

The handle for lift and press down wasn\'t catching the and causing a very large swing in the handle

Robert from Victoria, Texas

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set, Wrench (Adjustable)
Parts Used:
532403457, 532403456
Pulled the handle,disconnect the stop cable, removed the rear wheels and placed on my work bench. removed the grass flap on the back to access the bolt and nut to remove the RH and LH wheel brackets. Both little bent tips were rusted and broken on both brackets. Took about 20 minutes to replace, the brackets and all other parts - work ju st fine
Read less
Did you find this story helpful?
Thank you for voting!

Tab broke where handle connects to lawn mower body on both left and right sides. Also handle wing knob and bolt missing.

John from NEW CASTLE, Delaware

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Socket set, Wrench (Adjustable), Wrench set
Parts Used:
532403457, 532403456, 532185577, 532191574
Replaced both left and right brackets and wing nut and bolt. Very simple repair.
Did you find this story helpful?
Thank you for voting!

Excessive handle travel up/down....

Gary from Austin, Texas

1 person found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers, Socket set
Parts Used:
532403457, 532403456
1. Put mower on high table for work convenience
2. Remove the back wheels and the parts behind the wheel
3. Remove the cotter pin from the bracket on the bottom handle
4. Remove the bottom handle from the bracket
5. Assemble in reverse order

Did you find this story helpful?
Thank you for voting!

all four tabs for the brackets were broken off - too weak.

Rod from Quincy, Washington

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Socket set
Parts Used:
532403457, 532403456
I did both at the same time - both off, then one on at a time.
Take photos of how it looks before you take it apart, to get install sequence and alignment correct.
Remove wheel. Keep all washers, etc. attached and in order.
Disconnect pull rope support from handle.
Remove nut (inside) from bolt. Catch the handle so it doesn\'t fall on you.
Remove wheel bracket.
Support the handle on the ladder to hold it in place. Install the new wheel bracket.
Align the bracket tabs and clamp everything together to hold in place while tightening bolt
install and tighten bolt.
Reinstall wheel.
Read less
Did you find this story helpful?
Thank you for voting!

Metal tabs wore off that keep the handle from moving to far up and down

Robert from WILLIAMSPORT, Pennsylvania

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Wrench set
Parts Used:
532403457, 532403456
Removed wheel
Removed old handle part
Replaced with new part
Replaced wheel
Did you find this story helpful?
Thank you for voting!

Wheel support bracket tabs broken, Rear skirt damaged

Harold from CANTON, Mississippi

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Socket set
Parts Used:
532403457, 532403456, 532413160
1) Removed wheel for access to support bolt
2) Removed support bracket bolt and part
3) New part set properly with tabs and secured
4) Screws removed with bracket, skirt placed and brackets and screws reinstalled
Did you find this story helpful?
Thank you for voting!

Tabs on both wheel bracket support had broken

Dick from Neenah, Wisconsin

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Socket set, Wrench (Adjustable), Wrench set
Parts Used:
532403457, 532403456
1. Removed left wheel assembly
2. Removed pin that held wheel bracket support to handle
3. Placed new support in place; clamped into position while putting handle in place.
4. Put wheel assembly back into place.
5. Repeated process on right side.
Important knowledge: it took a while to discover that this part for a Murray MX500 21-inch walk behind mower is the same as Poulan PO500 mower. Not even the Murray manufacturer could initially find the part. I discovered it look at similar parts and making an educated guess.
Read less
Did you find this story helpful?
Thank you for voting!

Tab on bracket was broke and the other bracket tab was badly worn

Jim from Tipp City , Ohio

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set, Wrench (Adjustable)
Parts Used:
532403457, 532403456
Removed old brackets and replaced with new brackets for lawn mower handle
Did you find this story helpful?
Thank you for voting!

The original wheel support bracket tabs rusted/broke off.

Eric from West Bend, Wisconsin

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Socket set, Wrench set
Parts Used:
532403457, 532403456
1. Removed Rear Wheels.
2. Removed Left and Right Wheel support bolts.
3. Removed cotter pin on handle bar support post.
4. Kept Wheel support bolts, bushing, washer, and nut in order after removing.
5. Removed the Wheel Bracket Supports, discarded.
6. Replace with NEW Wheel Bracket Supports.
7. Re-inse rted bolts, bushings, washer, and nut through new wheel support bracket and deck.
8. Tightened down bolts.
9. Re-attach handle bar and cotter pins
10. Re-attach wheels
Read less
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP16360209
Manufacturer Part Number: 532403457
Brand Model Number Description
Husqvarna 224111X83E Lawn Mower - /96117000200
Husqvarna 38508 Lawn Mower - /0
Craftsman 917371340 Lawn Mower - Lawn Mower
Craftsman 917371341 Lawn Mower - Lawn Mower
Craftsman 917371342 Lawn Mower - Lawn Mower
Craftsman 917371343 Lawn Mower - Lawn Mower
Craftsman 917371370 Lawn Mower - Lawn Mower
Craftsman 917385110 Lawn Mower - Lawn Mower
Craftsman 917385111 Lawn Mower - Lawn Mower
Craftsman 917385120 Lawn Mower - Lawn Mower
Craftsman 917385121 Lawn Mower - Lawn Mower
Craftsman 917385122 Lawn Mower - Lawn Mower
Craftsman 917385123 Lawn Mower - Lawn Mower
Craftsman 917385124 Lawn Mower - Lawn Mower
Craftsman 917385125 Lawn Mower - Lawn Mower
Craftsman 917385126 Lawn Mower - Lawn Mower
Craftsman 917385127 Lawn Mower - Mower
Craftsman 917385320 Lawn Mower - Lawn Mower
Craftsman 917385321 Lawn Mower - Lawn Mower
Craftsman 917385322 Lawn Mower - Lawn Mower
Craftsman 917387350 Lawn Mower - Lawn Mower
Craftsman 917387360 Lawn Mower - Lawn Mower
Craftsman 917387460 Lawn Mower - Lawn Mower
Craftsman 917387461 Lawn Mower - Lawn Mower
Craftsman 917387470 Lawn Mower - Lawn Mower
Craftsman 917387471 Lawn Mower - Lawn Mower
Craftsman 917387472 Lawn Mower - Lawn Mower
Craftsman 917387560 Lawn Mower - Lawn Mower
Craftsman 917387561 Lawn Mower - Lawn Mower
Craftsman 917387610 Lawn Mower - Lawn Mower
Complete Bracket Assembly
$ 14.87
Special Order
✖
Stock Status
✖
Mail-In Recycling Rebate

Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.

✖