Part Location Diagram of 243281-02 DeWALT Magnet Ring
See part 55 in the diagram
( Grid squares measure 1x1 inch )

Magnet Ring 243281-02

Manufactured by:
DeWALT
ERP Number:
ERP9927782
Part Number:
243281-02
Original Equipment Manufacturer ?
  Works with your model  MM875!
$62.99
In Stock
Delivers in 3-5 Business Days!

Difficult 

30 - 60 mins 

(1 rated repair) ?
  Works with your model   MM875!

Troubleshooting

This part works with the following brands:
  • Black and Decker
  • DeVilbiss
  • Craftsman
This part works with the following products:
  • Lawn Mower
Part# 243281-02 replaces these:
243281-02, P243281-02,

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Difficult 

30 - 60 mins 

(1 rated repair) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

The magnet ring broke and lawn mower would not start.

Socorro from Katy, Texas

1 person found this instruction helpful.
Difficulty Level:
Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Socket set, Wrench set
Parts Used:
243281-02
1. Remove the lawn mower cover
2. Remove the motor nuts and bolts
3. Turn lawn mower over to remove the bottom blade, remove flange, and the nuts to remove motor from lawn mower.
4. Once motor is removed remove long two screws from motor assembly.
5. Remove broken magnetic ring, to pull up ring by holding dow n with feet wiggle off ring until it loosens off. Make sure you check by taking picture or make. note, which side goes up, there should be space up from top of ring upright.
6. Replace with new magnetic ring. Assemble back all parts.
7. Make sure to replace all nuts and bolts removed.
8. Test lawn mower, should start right up, if done correctly.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP9927782
Manufacturer Part Number: 243281-02
Brand Model Number Description
DeVilbiss 35212 Lawn Mower - 9amp Lawnmower
DeVilbiss 35216 Lawn Mower - 12amp Lawnmower
Black and Decker 35512 Lawn Mower - Lawnmower
Black and Decker 35516 Lawn Mower - Lawnmower
DeVilbiss 35517 Lawn Mower - 18 Inch Mower
DeVilbiss 35518 Lawn Mower - 18 Inch Mower
DeVilbiss 35519 Lawn Mower - 19 Mulching Mower
Black and Decker 35913 Lawn Mower - Lawn Mower
Black and Decker 37051 Lawn Mower - 19 Crafts Electric Mower
Craftsman 900370510 Lawn Mower - Lawn Mower
Craftsman 900370511 Lawn Mower - Lawn Mower
Black and Decker LM175 Lawn Mower - 18-Inch 6.5a Mower
Black and Decker MM1800 Lawn Mower - 18 Inch Mulching Mower
Black and Decker MM275 Lawn Mower - 18" Electric Mulching Mower
Black and Decker MM525 Lawn Mower - Corded Mulch Mower
Black and Decker MM550 Lawn Mower - 12 Amp Mulch Mower
Black and Decker MM575 Lawn Mower - 18" Electric LAWNHOG Mulching Mower
Black and Decker MM600 Lawn Mower - 18 Inch 4 Horse Power Mulching Mower
Black and Decker MM600B Lawn Mower - Lawn Mower
Black and Decker MM600S Lawn Mower - 18 Electric Mower
Black and Decker MM675 Lawn Mower - 18" Electric "LAWNHOG&trade" Mulching Mower with Flip-Over Handle
Black and Decker MM850 Lawn Mower - 19 Mulching Mower
Black and Decker MM850S Lawn Mower - 19 Electric Mower
Black and Decker MM875 Lawn Mower - 19 Mulching Mower