Part Location Diagram of 5140161-22 DeWALT RETAINING RING
See part 21 in the diagram
( Grid squares measure 1x1 inch )

RETAINING RING 5140161-22

Manufactured by:
DeWALT
ERP Number:
ERP18982925
Part Number:
5140161-22
Original Equipment Manufacturer ?
  Works with your model  MM2000!
In Stock
Delivers in 3-5 Business Days!

Easy 

Less than 15 mins 

(4 rated repairs) ?
  Works with your model   MM2000!

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Black and Decker
  • Craftsman
This part works with the following products:
  • Lawn Mower
Part# 5140161-22 replaces these:
5140161-22, P5140161-22,

Customer Part Reviews

?
4.6
Average Rating (out of 5):
★★★★★
★★★★★
(7 Reviews)
Click to filter by ratings:
  • 5 stars
    5
  • 4 stars
    1
  • 3 stars
    1
  • 2 stars
    0
  • 1 star
    0
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

Less than 15 mins 

(4 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Lawn mower wheels kept falling off.

NANCY from Kelso, Washington

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
Parts Used:
5140161-22
1. Removed all hubcaps
2. Pulled wheels off axles
3. Cleaned all parts
4. Replaced wheels
5.tapped new retaining rings into place using a deep socket and a rubber mallet.
6. snapped hubcaps back on.
Did you find this story helpful?
Thank you for voting!

Lawn mower wheel fell off the front of the mower.

Allan from GLEN ALLEN, Virginia

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Socket set
Parts Used:
5140161-22
I removed the hub from the front wheel and removed the broken retaining ring.
Then I slid the wheel back on the axel and placed the new retaining ring on the axel up to the groove in the axel.
Taking a proper-sized socket, I placed it on the retaining ring and lightly tapped the socket with a hammer until the retaining ring sl ipped into the groove on the axel.
I then pulled on the wheel making sure it was locked in place.
Tapped the hub back on the wheel and I was finished.
The wheel did not fall off when I cut the grass, so I would say the repair was successful!
Did you find this story helpful?
Thank you for voting!

Lawn mower front wheel came off, retainer ring came off and lost

Keith from MYRTLE BEACH, South Carolina

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
Parts Used:
5140161-22
Installed wavy ring
Installed wheel
Installed retainer ring to hold wheel in place
replaced front cover
Did you find this story helpful?
Thank you for voting!

Wheel hub retaining ring came off.

Michael from SAN YSIDRO, California

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
Parts Used:
5140161-22
1. Lifted off wheel cover.
2. Slid wheel off axle.
3. Remove two wheel hubs from wheel and cleaned with WD-40.
4. Replaced wheel hubs and remounted onto axle.
5. Secured wheel to axle with new retaining ring. Use pliers to set ring into groove in axle shaft.
6. Replaced wheel cover.
Since the retaining rings are sold in a two-pack, I have a spare for any of the four wheels!
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP18982925
Manufacturer Part Number: 5140161-22
Brand Model Number Description
Craftsman 90098820 Lawn Mower - Cordless Lawnmower
Craftsman 98820SE Lawn Mower - Cm2040 - Cm 40v (2) 2.5ah
Black and Decker CM2040 Lawn Mower - 40v 20in Lith Mower
Black and Decker CM2043C Lawn Mower - 40v Max 20 In Mower
Black and Decker CM2045 Lawn Mower - 40v 20in Lithi Mower
Black and Decker CM2060C Lawn Mower - 60v 20in Lithi Mower
Black and Decker CM2060CSE Lawn Mower - 60v Max 20 In Powerswap Mower
Black and Decker MM2000 Lawn Mower - 13 Amp 20in Corded Mower-