Water Pump Hoses and Tubes

The purpose of the 13201056330 Fuel Return Tube is to return the excess fuel back into the fuel tank, after the primer bulb has been pressed and has primed the carburetor to start. After time the Fuel Return Line will become brittle and crack and will need to be replaced.

The V471001190 Fuel Pipe is connected to the fuel filter inside the fuel tank. It is inserted through the fuel line grommet and then connected to the carburetor so that when the primmer is pushed, it will force fuel into the carburetor. Fuel lines will at some time become brittle and crack and will have to be replaced.

This is an OEM Honda part manufactured for use with small engines. This rubber grommet is used to provide a seal to allow fuel lines to pass into and out of the fuel tank without leaking. Overtime fuel can deteriorate the grommet, so replacing it can ensure a good seal. The grommet is sold individually, please see model diagram for additional parts.

The fuel hose attaches to the tube clip and the fuel filter. This part is available individually. It is a genuine OEM sourced part which is specifically designed for use with Honda and Toro engines. You may need a set of pliers when replacing this part. This item is made out of rubber and will need to be replaced if it breaks.

This is a genuine Honda replacement part that has been sourced from the original manufacturer to be used with small engines. The rubber fuel tube is used to connect the fuel lines to the bottom of the tank and to support the fuel filter. This item may not require tools to install and is sold as an individual replacement part.

This is an authentic Shindaiwa replacement part that has been sourced from the original manufacturer to be used with power brooms, trimmers, and water pumps. The plastic fuel tube connects to the fuel filter assembly and is used to pick-up fuel from the tank and relay the gas to the carburetor. This item is available as an individual replacement part.

The breather tube is an OEM part direct from Honda for use with small engines. The purpose of the breather tube is to guide the direction of excess gas from building in the cylinder head. The rubber breather tube is sold as an individual replacement part. Please refer to your model's diagram from any additional parts.