Poulan Trimmer Transmissions and Clutches

This item has been OEM sourced to ensure a high level of quality. The gearbox assembly is intended to be used with trimmers from Husqvarna and Jonsered. The gearbox attaches to the bottom of the lower drive shaft. This item is used to connect the rotation of the shaft with the rotation of the cutting head. This gearbox is sold as an individual replacement part.

This is an authentic replacement part manufactured for use with Husqvarna brushcutters and trimmers. The driver assembly fits on the bottom of the gear case and is used to cover the spindle and bearings. This driver assembly is sold as an individual replacement part.

The metal clutch has been OEM sourced to be used with trimmers, pruners, and brushcutters from Poulan, Weed Eater, Husqvarna, and Jonsered. The clutch assembly fits into the clutch drum and is connected to the motor's drive shaft. The clutch allows the machine to idle without driving the cutting head. This part is sold as an individual item.

This is an original part from Poulan for use with Trimmers and Hedge Trimmers. The clutch kit attaches to the crankshaft and engages to spin the flex shaft and cutting head. The most common reason for replacing the clutch is if the engine won't start. The clutch kit includes the clutch and clutch gasket. The tool that you will need to replace the clutch kit is a T-25 Torx head screwdriver, spark p...

The clutch drum goes in the gearbox and is made of metal. It is a genuine OEM sourced part which is specially designed for use with Poulan trimmers. This is available as an individual replacement part. When replacing this item a socket set and a wrench set may be needed. It will require replacing if it breaks.

This sprocket assembly kit is produced by original manufacturer. It is compatible with various Poulan power tools. Each kit includes one (1) each of: sprocket, washer, and sprocket retainer. Each item is available separately as well. Sprocket item # 530056520 Washer item # 530056521 Sprocket retainer item # 530056563

This is an OEM sourced replacement part used on Husqvarna and Jonsered trimmers and brushcutters. The clutch drum works in unison with the clutch. Together, they make it possible for the engine to idle without rotating the trimmer head. When the throttle is applied, the clutch assembly expands into the clutch drum, which activates the trimmer head. This high-quality clutch drum is made of durable ...

This part has been sourced from the original manufacturer to ensure a high level of quality. The gearbox assembly is intended to be used with trimmers from Weed Eater and Poulan. This is a pre-assembled gearbox that includes all the gears, bearings, and linkages. This part is used to connect the lower drive shaft and the cutting head assembly and to allow the two parts to rotate in unison. This ge...

This is an original part from Craftsman for use with Trimmers. The clutch drum engages with the clutch to spin the flex shaft and cutting head. The most common reasons for replacing the clutch drum is if the trimmer head is not rotating under the throttle, the trimmer head stops when under load (when the line contacts the lawn, weeds, etc.), the drive shaft is not engaging, the clutch is not engag...