Troy-Bilt Tiller Springs and Shock Absorbers

This part is an OEM from MTD for use with Snowblowers. The most common reason for replacing the throttle spring is when it is damaged during another repair. This part is sold individually. Here is a list of tools that are needed to replace the throttle linkage spring needle nose pliers, 3/8 inch socket, 1/2 inch socket, 3/4 inch socket, 10 mm socket, Phillips-head screwdriver and a 5/16 inch wrench.

This authentic item is supplied directly from the original equipment manufacturer for use with MTD and Troy-Bilt lawn and garden equipment. It is an identical replacement for a missing or faulty spring that was originally installed on a new unit, please make sure to check the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-qualit...

This is an authentic replacement part that has been sourced from the original manufacturer to be used with trimmers from Ryobi, MTD, Troy-Bilt, Yard-Man, and Bolens. The recoil spring is part of the starter assembly and is used to wind the rope back around the pulley after it has been pulled. This spring is priced as a single item.

The torsion spring attaches to the throttle control. It is a genuine item that is supplied by the original equipment manufacturer for use with MTD and Troy-Bilt cultivators. This part is made of metal and is available individually. During replacement, it may require a set of pliers to help install this part correctly. It will require replacing if it becomes bent or broken.

This is an original MTD replacement part. The extension spring is designed by the manufacturer for use in lawn tractors and tillers. This part is made of metal, and may be found in various locations in the machine, depending on model. Please be aware that there are different springs used in the machine. Refer to the parts diagram to be sure of ordering the correct part. You may require a wren...

Spring