Snapper Snow Blower Hardware

This is a genuine OEM sourced replacement shear pin designed for use with snow blowers/throwers. Shear pins are installed in order to protect your snowblower and it measures 1/4 X 1.750. If the auger gets jammed or clogged, shear bolt is designed to snap at a certain point of pressure, so it will not damage any other part of the unit. This pin is made out of metal and it is sold individually. Plea...

This is an OEM part sourced directly from the manufacturer. The nut is commonly found in lawn tractors and snowblowers. This part is made of metal, and may be found in various locations in the machine, depending on model. Please be aware that there are different nuts used in the machine. Refer to the parts diagram to be sure of ordering the correct part. You will require a wrench when replaci...

This is a genuine OEM sourced replacement part designed for use with Murray lawn and garden equipment. This is a standard hardware which has multiple applications based on your unit. Please refer to diagrams of your equipment for correct application. This item is made out of metal and it is sold individually.

This is an authentic Murray replacement part that has been sourced from the original manufacturer to be used with riding lawnmowers. The metal washer is used to provide spacing between the steering spindle and the front axle assembly. This item is sold individually, please note two washers may be needed.

This is a genuine manufacturer-sourced part which is specially designed for use with Murray, Snapper and Simplicity lawn and garden equipment. A lock nut is a type of nut that resists loosening when properly threaded onto a bolt. This is standard hardware which may have multiple applications, please make sure to refer to the appropriate diagrams of your model for the correct location and applicati...

This item has been sourced from the original manufacturer to be used with lawn tractors from Murray. The metal washer is used with different types of mowers and the application of the washer can vary based on the model of the machine. This washer is sold as an individual replacement part.

The metal flat washer is priced individually. It attaches to the cast iron axle along with the bolt and the bearing. A set of pliers, a screwdriver, and a wrench may be necessary during the installation of this item. This is an original part for Murray lawn tractors and Snapper rear engine rider mowers.

This is a genuine OEM sourced replacement part for Lawn and Garden equipment. A lock nut is a type of nut that resists loosening when properly threaded onto a bolt. It will have different applications based on your equipment. Please refer to diagrams for proper use. This item is metal an is sold individually. You would need a wrench to tighten/loosen this nut.

This is a genuine OEM sourced replacement hardware designed for use with snowblowers. Shear bolts are installed in order to protect your unit. If the auger gets jammed or clogged, shear bolt is designed to snap at a certain point of pressure, so it will not damage any other part of the unit. It is made from metal and it is sold individually. You will need a wrench to remove or install this bolt.