OEM Classen Seeder Parts & Accessories

Bearing, Flange

$62.56

Manufacturer Part Number:: C100050

The flange bearing goes next to the drive pulley. This is a genuine Classen part sourced directly from the manufacturer for use in turf rakes and turf seeders. This item is made out of metal and is priced individually. During the installation process, a wrench might be needed to replace this part. It will need to be replaced if it breaks or wears down.

Belt

★★★★★

(3)

$54.33

Manufacturer Part Number:: C100065

This is a genuine OEM approved replacement belt which is specially designed for use with Classen turf seeders. It is the main belt which drives the unit, over time it may wear out and stretch eventually requiring a replacement. Make sure to clean pulleys before installing the new belt to ensure the peak performance and longevity of your new belt. This durable part is made of high-quality rubber a...

1/2in Lock Washer

$6.16

Minimum Quantity of 2 required

Manufacturer Part Number:: C500006

This is an authentic replacement part manufactured for use with Classen sod cutters, aerators, seeders, and turf brushes. Lock washers are commonly used to prevent bolts from unthreading from the part assembly the bolt is used to secure. The lock washer is sold as an individual replacement part, please see model diagram for part location and usage.

Rake Blade

★★★★★

(3)

$6.16

Manufacturer Part Number:: C300019

Genuine Classen replacement part, this item is sold individually. This is the part that makes contact with the turf when using a Seeder or Turf Rake. Over time this part will wear down and not properly do the job it was intended to do. When replacing this part it is advised to inspect the remaining Blades for wear.

Finger Spacer

$6.16

Manufacturer Part Number:: C100056

Genuine Classen replacement part, this item is sold individually. The spacer is used on the Classen Turf Rakes & Turf Seeders shown below. The spacers are placed on the Satelite Shaft in between the Blades to keep them the correct distance apart. Theses spacers have a tendency to wear, it is advised to keep a few of the on hand for future use.

E Ring

$6.16

Manufacturer Part Number:: C500078

This is an authentic item that is supplied by the original equipment manufacturer for use with Classen equipment. It is an identical replacement for a missing or a faulty e-ring that was installed on a new unit, please make sure to check the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality component is made of durable meta...

Spring Peened

$6.16

Manufacturer Part Number:: C100623

Cable Assembly, Tr-20/ts-20 Cl

★★★★★

(2)

$55.11

Manufacturer Part Number:: C100053

This is a genuine Classen part sourced directly from the manufacturer for use in turf rakes and turf seeders. The cable assembly connects to the upper main handle and is made of metal and plastic. A wrench may be necessary during the installation of this part. It might become broken or stretched and will need to be replaced. This is available as an individual replacement part.

Nut, 1/2

$6.16

Manufacturer Part Number:: C500106

This is an original Classen replacement part, not an aftermarket imitation. The nut is manufactured for use with outdoor power equipment like sod cutters. This nut is a versatile part and can be used on different types of machines, please see model diagram for part uses, location, and application. The nut is sold individually.

Grease Fitting, 1/4x28

$6.16

Manufacturer Part Number:: C500001

It is a genuine item that is supplied by the original equipment manufacturer for use with Classen sod cutters. This is an identical replacement for a missing or damaged grease fitting that was originally installed on a new unit, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality component is ...

Wheel, 8

$72.91

Manufacturer Part Number:: C100064

Shaft, Satelite

★★★★★

(1)

$50.97

Manufacturer Part Number:: C300014

The satellite shaft goes between the rake main shaft and the finger spacer. It is available as an individual replacement part, but keep in mind that more than one may be needed. This part is an OEM from Classen for use in turf seeders and turf rakes. This shaft is made out of metal and may become broken and will need to be replaced. A screwdriver might be needed during the installation process.

Classen Seeder Parts

Top Classen Seeder Models

Popular Classen Seeder Parts

Classen Seeder Models

Classen Seeder Parts

Search By Model or Part Number

Top Classen Seeder Models

Popular Classen Seeder Parts

Classen Seeder Models