Simplicity Leaf Blower / Vacuum Hardware

This is an OEM Snapper and Simplicity part directly sourced from the manufacturer for use in lawn tractors. The push nut connects to the roller and is made of metal. During the installation process, a screwdriver might be needed to replace this part. Over time this item may break and will need to be replaced. This item is available as an individual replacement part.

This is an OEM part sourced directly from the manufacturer. The nut is commonly found in lawn tractors and snowblowers. This part is made of metal, and may be found in various locations in the machine, depending on model. Please be aware that there are different nuts used in the machine. Refer to the parts diagram to be sure of ordering the correct part. You will require a wrench when replaci...

This is an authentic Murray replacement part that has been sourced from the original manufacturer to be used with riding lawnmowers. The metal washer is used to provide spacing between the steering spindle and the front axle assembly. This item is sold individually, please note two washers may be needed.

This is a genuine manufacturer-sourced part which is specially designed for use with Murray, Snapper and Simplicity lawn and garden equipment. A lock nut is a type of nut that resists loosening when properly threaded onto a bolt. This is standard hardware which may have multiple applications, please make sure to refer to the appropriate diagrams of your model for the correct location and applicati...

This is a genuine OEM sourced replacement part for Lawn and Garden equipment. A lock nut is a type of nut that resists loosening when properly threaded onto a bolt. It will have different applications based on your equipment. Please refer to diagrams for proper use. This item is metal an is sold individually. You would need a wrench to tighten/loosen this nut.

This is an authentic OEM sourced replacement component which is specially made for use with Craftsman lawn and garden equipment. It is a standard hardware which has multiple applications, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this item. Keep in mind this high-quality hex nut is made of durable metal and is sold individually.

This is an authentic replacement part sourced directly from the manufacturer. The screw is commonly found in snowthrowers and lawn tractors from Murray, Simplicity, and Snapper. This part is made of metal, and may be found in various locations in the machine, depending on model. Please be aware that there are different screws used in the machine. Refer to the parts diagram to be sure of orderi...

This is an authentic manufacturer-sourced replacement part, it is specially designed for use with Murray, Snapper and Simplicity lawn and garden equipment. It helps to distribute the pressure and provide a tight seal between connected parts. This is a standard hardware which has multiple applications, please make sure to check the appropriate diagrams of your model for the correct location and app...

BOLT, 5/16-18 x 3/4" Short Neck Carriage, GR 5

This is an authentic OEM sourced component which is specially made for use with Murray and Snapper lawn and garden equipment. The part provides an identical replacement for a missing or a faulty capscrew that was installed on a new unit. It is a standard hardware which may have multiple applications, please make sure to refer to the appropriate diagrams of your model for the correct location and a...

It is a genuine OEM sourced component which is specially designed for use with lawn and garden equipment. It is an identical replacement for a missing or a faulty washer that is utilized to provide a tight seal between connected parts. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality washer...

It is an authentic item which is supplied directly from the original equipment manufacturer for use with Snapper and Simplicity lawn and garden equipment. The washer is generally utilized to provide a tight seal between connected pieces, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality item...

It is a genuine item that is supplied by the original manufacturer for use with Briggs and Stratton, Murray and Snapper lawn mowers. This washer is a special part which helps to provide a tight fit between wing knob and the upper handle. It is an identical replacement for a damaged or a missing hardware that was installed on a new unit. Check the diagrams of your model for the exact location and t...

Nut hex flng 5/16-18

The screw attaches the steel blade to the blade hub. It is a genuine OEM sourced part which is specifically designed for use with lawn mowers made by Murray, Briggs & Stratton, Snapper, and Simplicity. This part is available as an individual replacement part and is made of metal. It will require replacing if it strips or breaks and when replacing this part a wrench will be needed.

It is an authentic manufacturer-approved replacement part which is produced for use with Murray, Snapper and Briggs and Stratton lawn and garden equipment. This special bolt is utilized to secure the upper and lower handles of the push lawn mower, please note the bolts and other components are all sold separately. It is a high-quality hardware which is sold individually.

An authentic manufacturer sourced part which is supplied for use with Briggs and Stratton, Murray, and Snapper lawn and garden equipment. This replacement nut has a few different applications, please make sure to check the appropriate parts lists and diagrams of your model for the exact location of this hardware. Note, this durable metal nut is sold individually. You will need a wrench to secure or remove it.