Little Wonder Leaf Blower / Vacuum Hoses and Tubes
Find the Little Wonder Leaf Blower / Vacuum Hoses and Tubes you need fast. Shop our list of best-selling OEM Little Wonder Leaf Blower / Vacuum Hoses and Tubes below. Or search with your Little Wonder Leaf Blower / Vacuum model number to get the full list of parts that fit your specific model, detailed diagrams, and video tutorials.
Popular Little Wonder Leaf Blower / Vacuum Hoses and Tubes
- Manufacturer Part Number:
- 13201056330
The purpose of the 13201056330 Fuel Return Tube is to return the excess fuel back into the fuel tank, after the primer bulb has been pressed and has primed the carburetor to start. After time the Fuel Return Line will become brittle and crack and will need to be replaced.
- Manufacturer Part Number:
- 13201212362
This is a genuine OEM replacement part, this item is sold individually. The Corrugated Fuel Tube is situated inside the fuel tank. The fuel filter is connect to it. It also connected to the fuel line by means of the fuel grommet on the fuel tank. It part of the delivery system that supplies fuel into the carburetor.
- Manufacturer Part Number:
- 21501205060
This manufacturer-approved replacement part is specially designed for use with Little Wonder, Shindaiwa and Echo backpack blowers. This part interlocks with the other blower tubes that are sold separately. Over time it can crack allowing for air leaks and eventually require a replacement. This high-quality elbow tube is made of durable plastic and is sold individually. Make sure to refer to the ow...
- Manufacturer Part Number:
- 13201103360
Genuine OEM replacement part, this item is sold individually. The Tube Connector is attached to the in tank fuel line which has the fuel filter connected to it. It is then pressed through the Fuel Line Grommet and the Fuel line is connected to it.
- Manufacturer Part Number:
- 21001420561
This is an OEM accessory designed for the blowers/vacs/shredders listed below. This fan head nozzle attaches to the straight pipe's end. It features a beveled edge tip. This nozzle is designed as an easy twist on/off attachment. Sold individually.
- Manufacturer Part Number:
- V471001200
This is the replacement vent tube for your outdoor power equipment. It is made of black plastic and is approximately 3 inches long and ¼ inch thick. The vent tube allows air into the fuel tank so that a vacuum is not created when fuel is being fed through the fuel line. The vent tube is often connected to the fuel line grommet that is installed on the fuel tank. If the vent tube is broken or missi...
- Manufacturer Part Number:
- P005000500
- Manufacturer Part Number:
- 720003
- Manufacturer Part Number:
- 720264
- Manufacturer Part Number:
- 720265
- Manufacturer Part Number:
- 720405
- Manufacturer Part Number:
- 600102
This is a flexible hose made to attach to the vacuum's front suction nozzle. It is 7" in diameter and 11" long and reaches from the nozzle to the front plate. It is secured on each end with two hose clamps, part # 720420. This hose is sold individually.
- Manufacturer Part Number:
- 720100
- Manufacturer Part Number:
- 720107
- Manufacturer Part Number:
- 720279
- Manufacturer Part Number:
- 720291
- Manufacturer Part Number:
- 720292
- Manufacturer Part Number:
- 720295
- Manufacturer Part Number:
- 720324
- Manufacturer Part Number:
- 720387