Little Wonder Leaf Blower / Vacuum Hardware

This is a genuine ECHO/Shindaiwa replacement part It is compatible with over 150 machines listed below. The Fuel Line Grommet is placed into the fuel tank. The Vent tube, Fuel return line and fuel line are inserted through the three holes. A worn Fuel Line Grommet will cause fuel to leak from the tank. When replacing the Grommet it is advisable to replace the fuel lines at the the same time.

Genuine OEM replacement part,this item is sold individually. The purpose of the Wing Bolt is to secure the Air Filter Cover and Air Filter to the Air Cleaner Case on all of the Outdoor Products shown below.

This manufacturer sourced replacement part designed for use with a variety of handheld lawn and garden equipment. A lock nut is a type of nut that resists loosening when properly threaded onto a bolt. This is a standard hardware which will have multiple applications based on your equipment. This lock nut is made out of metal and it is sold individually.

This is a genuine OEM sourced replacement part designed for use with Echo blowers/trimmers. This is a standard hardware which has multiple applications based on your unit. Please refer to diagrams for proper application. This screw is made out of metal and it is sold individually. To remove or install this screw you would need a screwdriver.

This washer is available as an individual replacement part. It is used in various lawn and garden tools made by Echo and Shindaiwa. The washer attaches to the cylinder cover with a screw. It is made out of metal and is very small, so it will need to be replaced if it becomes lost or broken. An allen wrench will be needed when replacing this washer which is an authentic OEM part.

This Genuine OEM screw is a standard replacement part used on a variety of gas-powered trimmers and brushcutters. Constructed from durable metal and sold individually, this screw is typically used to secure the starter cover to the unit, ensuring a tight and stable fit during operation. The screw features a 4x16 thread size and requires a hex key or Allen wrench for proper tightening or removal...

This is a genuine manufacturer sourced replacement washer that is designed for use with Shindaiwa and Echo handheld lawn and garden equipment. It helps to distribute the pressure evenly between two connected parts, for proper application please make sure to check appropriate diagrams of your unit. This part is made from durable metal and it is sold individually.

This manufacturer sourced replacement flange nut is specially made for use with Shindaiwa and Echo lawn and garden equipment. This is a standard hardware which will have multiple applications depending on your equipment. Please make sure to check appropriate diagrams for correct location and use of this hardware. This lock nut is made from durable metal and it is sold individually. You will need a...

This genuine OEM replacement part is specially produced for Shindaiwa and Echo handheld lawn and garden equipment. It is generally used to secure the muffler, for correct application of this hardware please make sure to check appropriate diagrams of your unit. This hex socket head bolt is made from durable metal and it is sold individually. When installing or removing this bolt you will need a hex...

This screw is supplied directly from original equipment manufacturer for use with Shindaiwa and Echo power equipment/tools. This screw is a standard hardware that has multiple uses depending on your model. Please make sure to check appropriate diagrams for correct location and application for this screw. It is made out of metal and it is sold individually. To secure/loosen this screw you would need a screwdriver.