Husqvarna Leaf Blower / Vacuum Hardware

This flangelock hex nut is an OEM part direct from Husqvarna. Constructed of durable metal, this item is compatible with many riding lawn mowers. The flangelock hex nut is fastened to the carriage bolt, securing the axle assembly braces. Although this part is sold individually, three are often required. Carriage bolts are also sold separately. A wrench set is required for the replacement.

Genuine Manufacturer Approved Carriage Bolt is a standard part that fits a variety of products. This part is sold individually and the Nut is not included. The square area under the head is designed to fit into a square hole in the workpiece. It is this square hole that restrains the bolt and keeps it from turning when the nut is tightened.

It is an authentic item that is supplied directly from the original equipment manufacturer for use with Husqvarna and Poulan lawn and garden equipment. A washer is generally utilized to provide a tight seal between connected parts, over time it may wear out or simply get lost eventually requiring a replacement. Please make sure to check the appropriate diagrams of your specific model for the corre...

This is a Manufacturer Approved replacement nut for lawn and garden equipment. This item is Metal an is Sold Individually. A lock nut is a type of nut that resists loosening when properly threaded onto a bolt.

This is a genuine OEM replacement part used on a variety of Lawn and Garden Equipment. This part is made out of Metal and it is Sold Individually. This steel washer has several applications based on your unit. Please refer to diagrams for proper application.

Genuine Husqvarna kit. This kit contains the fuel lines, fuel filter and primer bulb and grommet for all of the Husqvarna Blowers listed below. This makes it very convenient when you need all of the separate parts. You can order them in one kit.

The screw with hex washer attaches to the pivot bracket assembly. This item is available as an individual replacement part. This genuine part is supplied by the original equipment manufacturer for use with Craftsman lawn tractors and lawn mowers. A wrench will be necessary during the installation of this item. It is made of metal and will require replacing if it becomes broken or stripped.

This is a genuine OEM sourced replacement part commonly used on lawn and garden equipment. This specially designed lock nut resists loosening when it is properly threaded onto a bolt. It is has multiple applications depending on the model of your equipment. Always make sure to check appropriate diagrams for correct use and location of this nut. Includes one item per order. You will need a wrench...

This hardware is an authentic OEM sourced item. It is a specially manufactured for use with lawn and garden equipment. A lock nut is a type of nut that resists loosening when properly threaded onto a bolt. This part has multiple applications depending on the equipment. Please always check appropriate diagrams for correct location and use of this item. Please note, it is sold individually. You will...

The retainer spacer attaches to the arm-idler. It is an authentic part from Husqvarna, Poulan, Weed Eater, and Jonsered for use in ride mowers and lawn tractors. This part is sold individually and is made of metal. An allen wrench might be necessary during the installation of this part. This part may become broken and will need to be replaced.

A genuine item that is supplied by the original equipment manufacturer for use with lawn and garden equipment. It is a high-quality screw which has a few different applications depending on the model of your unit, please refer to the appropriate diagrams for the correct location and application of this hardware. Keep in mind this durable metal component is sold individually.

This swivel joint is a genuine Husqvarna replacement part that is specially designed for use with backpack blowers. It is the joint that connects on one end to the flexible hose and to the middle tube on the other end. If this part is cracked or damaged otherwise the blower will loose the airflow power requiring joint replacement. This swivel joint is made from durable black plastic and it is sold individually.

It is a genuine OEM sourced replacement screw which is specially designed for use with Husqvarna, Poulan and Ryobi riding lawn mowers and garden tractors. This item is a standard hardware which has multiple applications depending on the model of your unit, please make sure to check appropriate diagrams for the correct location and use of this item. It is a high-quality hex head screw which is made...

This is a genuine replacement part sourced directly from original manufacturer. It is designed for use with Kawasaki handheld equipment. This grommet fits in the fuel tank and it helps to secure hose. It is made out of rubber and it is sold individually. No tools are needed to replace.

Genuine OEM replacement part used on a variety of lawn and garden equipment. This item is Metal an is Sold Individually. A lock nut is a type of nut that resists loosening when properly threaded onto a bolt.

This hexagon head screw is a durable fastener designed for reliable use in outdoor power equipment such as lawn tractors, snow blowers, and similar machines. Made from high-quality high carbon steel, it provides the strength and stability needed to withstand demanding operating conditions. The screw measures 5/16-18 in thread size with a 3/4-inch length, making it ideal for securely fastening comp...

This nylon-insert flange nut is designed for use on outdoor power equipment to securely fasten components exposed to vibration and torque. The built-in flange helps distribute load evenly without the need for a separate washer, while the nylock insert resists loosening during operation. It’s a simple, reliable replacement for maintaining safety, stability, and secure assembly across a wide range of equipment.

This item has been sourced from the original manufacturer to be used with tillers and riding lawnmowers from Husqvarna and Poulan. This metal washer is used to provide spacing or to disperse pressure put on a part assembly across a wider surface area. It is recommended to review your model\\\'s diagram to verify the washer\\\'s usage and compatibility. This item is sold individually.

It is a genuine OEM sourced replacement part which is specially designed for use with Shindaiwa and Echo handheld lawn and garden equipment. This item is a standard hardware which has multiple applications depending on the model of your unit, please make sure to check appropriate diagrams for correct location and use of this item. It is a high-quality hex head screw which is made of durable metal ...

This high-quality replacement washer is designed for use with a wide range of lawn and garden equipment. It plays a vital role in evenly distributing pressure between connected components, helping to ensure a secure and stable fit. Made from durable metal, this standard hardware piece is sold individually and can be used in various applications depending on your equipment model. Tip: Always re...