Husqvarna Leaf Blower / Vacuum Carburetors

This is a genuine OEM replacement part, it is sold individually. By pressing on the Purge Bulb, it will force fuel into the fuel line from the fuel tank into the carburetor. Once the carburetor is full of fuel, the excess fuel will be purged back into the tank in the fuel return line. Over time the primer will lose its elasticity or crack and need to be replaced. We have an article and video on

This is an Authentic OEM replacement part used on Gas-Powered Handheld Gas Blowers. The purpose of this part is to mix air and gas before the fuel mix goes to the engine. If the engine won\'t start and the tank is full of fresh fuel, test the carburetor by removing the air filter and pouring about a teaspoon of fuel into the carburetor. Pull the starter rope. If the engine starts and then quickly ...

This is a genuine manufacturer-sourced replacement gasket repair kit that is specially made for use with Paramount and Poulan lawn and garden equipment. It is utilized to replace carburetor gaskets and diaphragms that were originally installed on a new unit. If you have a problem with your carburetor this will usually take care of it. Keep in mind this high-quality kit is sold individually. Please...

Genuine OEM replacement part is made out of Plastic, this item is sold individually. This part is used on the carburetor for gas powered blowers to restrict the flow of air, thereby enriching the fuel-air mixture. Because this part is used quite frequently it has a tendency to wear. To replace it, simply press it on the Choke Shaft of the carburetor.

This genuine replacement part is designed for use with Poulan gas blower. It is sourced from original equipment manufacturer and it is sold individually. The purpose of this part is to mix air and gas before the fuel mix goes to the engine. If the engine won't start and the tank is full of fresh fuel, test the carburetor by removing the air filter and pouring about a teaspoon of fuel into the carb...

Carb. adaptor

This is a genuine OEM replacement part, it is sold individually. It is used on a variety of Gas Powered Equipment. The purpose of this part is to mix air and gas before the fuel mix goes to the engine. If the engine won't start and the tank is full of fresh fuel, test the carburetor by removing the air filter and pouring about a teaspoon of fuel into the carburetor. Pull the starter rope. If the e...

This metering diaphragm is an original part for use in edgers, blowers, trimmers, and chainsaws made by Poulan, Paramount, Weed Eater, Husqvarna, and Jonsered. It fits between the metering diaphragm gasket and the metering diaphragm cover. It is made of a thin material and will need to be replaced if it breaks. A screwdriver may be needed when replacing this part and keep in mind that it is sold individually.

This carburetor assembly is used on backpack blowers and similar outdoor power equipment to regulate the air-and-fuel mixture for proper engine operation. Built with durable metal components for consistent metering, it helps restore easy starting, smooth idling, and steady power when the original carburetor is worn, clogged, or damaged. It’s a direct replacement used to resolve issues such as hard...