Craftsman Leaf Blower / Vacuum Hoses and Tubes

This is the Genuine Craftsman replacement part. It is made out of Flexible Rubber and is Sold Individually. The purpose of the 530069216 Tank Purge Line is to return the excess fuel that is in the carburetor after the primer bulb has been pushed. The excess fuel is forced through the purge line back into the fuel tank. Over time the Tank Purge Line will become brittle and crack and will need to be replaced.

This 25-inch fuel line carries fuel from the tank to the carburetor, ensuring proper engine operation. Made from durable clear plastic, it is designed to withstand regular use but may become clogged or brittle over time. Replacing a worn or damaged line can help prevent leaks and restore reliable starting and performance.

This is a genuine OEM replacement part designed for use with gas trimmers/blowers. The fuel line is what delivers the fuel from the fuel tank into the carburetor. When you press the primer bulb, it will purge all the air out of the carburetor and fill its chambers with fuel. The excess fuel is then forced back into the tank through the return line. Over time these lines will become brittle and may...

Genuine Husqvarna kit. This kit contains the fuel lines, fuel filter and primer bulb and grommet for all of the Husqvarna Blowers listed below. This makes it very convenient when you need all of the separate parts. You can order them in one kit.

This is a genuine manufacturer-sourced item that is specially designed for use with Craftsman lawn and garden equipment. The purpose of this fitting is to connect two pieces of fuel line together, unfortunately, over time the material may wear out and begin to crack eventually requiring a replacement. Keep in mind this high-quality hardware is made of durable plastic and is sold individually. Plea...

This is a genuine OEM approved replacement part, it is specially designed for use with Craftsman gas powered lawn and garden equipment. By pressing on the purge bulb, it will force fuel into the fuel line from the fuel tank into the carburetor. Once the carburetor is full of fuel, the excess fuel will be purged back into the tank in the fuel return line. Over time the material may begin to deterio...

The 791-682039 Fuel Filter and Line, filters the fuel in the tank as it is forced into the carburetor up by means of the primer bulb. To install. Remove retainer ring from fuel line. Insert fuel line thru gas cap opening. Thread fuel line thru hole in bottom of the fuel tank. Pull fuel line thru to firmly seat against inside tank wall. Put retainer ring on fuel line,hold line and press ring firml...

This manufacturer approved replacement part is used on Black and Decker backpack blowers. This part interlocks with the other blower tubes that are sold separately. Over time it can crack allowing for air leaks. This will greatly decrease blowing/suction ability of the unit, therefore this part should be replaced. This tube is made out of black plastic and it is sold individually

This fuel line is an original part from Craftsman for trimmers, blowers, edgers and cultivators. This part is supplying gas, starting with the tank to the carburetor. You will need a screw driver, pliers, a hose pulling wire and cutters to replace this part. This fuel line is made of rubber and sold individually.

This nozzle assembly is designed for cordless handheld blowers to focus and direct airflow for more precise debris clearing in tight or hard-to-reach areas. Made from durable, flexible rubber, it slips onto the blower tube to concentrate air output and improve overall blowing efficiency. It’s a practical replacement for restoring full performance when the original nozzle is lost, cracked, or worn.

This replacement blow tube assembly is used on Black and Decker backpack blowers. This part interlocks with the other blower tubes that are sold separately. Over time it can crack allowing for air leaks. This would reduce blowing/suction ability of the unit. This tube is made out of black plastic and it is sold individually

This authentic OEM replacement part is specifically manufactured for the leaf blowers/vacs/mulchers listed below. This is Black & Decker's standard concentrator tip. It connects to the lower blow tube's end. This tip is designed for quick installation; no special tools are required. Sold individually.

This is a genuine OEM replacement part guaranteed to fit the leaf blowers/vacs/mulchers listed below. This accessory, known to Black & Decker as the Leaf Blaster attachment, features adjustable oscillation. It connects to the lower blow tube's end. No special tools are required for installation. Sold individually.

This durable plastic tube is a genuine Black & Decker part designed for use with sweepers. This tube attaches easily to the inner tube by snapping into place. Please note that the sweeper must be turned off and the battery removed prior to the installation or removal of any portion of the tube. This item is sold individually.

This replacement upper tube is a genuine OEM sourced item that is made for use with Black and Decker electric sweepers. It interlocks with other blower tubes that are sold separately to extend reach of the unit. Please note this part is made from durable black plastic and it is sold individually.

This is a genuine Craftsman replacement part that has been sourced from the original manufacturer to be used with blowers. The plastic tube is the lower portion of the assembly that guides air that is produced by the blower's impeller. This item may not require tools to install and is sold individually.

This is a genuine OEM replacement part guaranteed to fit the blowers listed below. This nozzle fits easily onto the upper blower tube. Its funnel shape concentrates air power, creating a high speed flow. This sturdy black plastic nozzle is sold individually.

This genuine item is supplied directly from the original equipment manufacturer for use with Poulan gas blowers and leaf blowers. The black upper vac tube fits onto the lower vac tube and helps to direct material into the bag. During replacement, it may require a screwdriver to help install the tube correctly. It will require replacing if it breaks. This part is made of plastic and is available as...

This part is available as an individual replacement part. The lower tube blower attaches to the upper tube blower. No tools should be needed when replacing this part. It is made of plastic and will require replacing if it breaks. This is a Poulan replacement part directly sourced from the manufacturer for use in blowers.

This is a genuine OEM sourced component which is specially designed for use with lawn and garden equipment. It is an identical replacement for a missing or a faulty nipple that connects the fuel hose, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this part. Keep in mind this high-quality nipple is made of durable plastic and is sold individually.