Craftsman Leaf Blower / Vacuum Hardware

This is a genuine manufacturer-sourced replacement hardware that is commonly utilized on Craftsman lawn and garden equipment. A lock nut is a type of nut that resists loosening when it is properly threaded onto a bolt. This is a standard hardware which has multiple applications depending on your unit, make sure to check appropriate diagrams for correct location and use of this item. Please note th...

Genuine Husqvarna kit. This kit contains the fuel lines, fuel filter and primer bulb and grommet for all of the Husqvarna Blowers listed below. This makes it very convenient when you need all of the separate parts. You can order them in one kit.

This is an original replacement part sourced directly from the manufacturer. The screw is commonly found in yard equipment from Craftsman, such as lawn tractors, snow blowers, and edgers. This part is made of metal, and may be found in various locations in the machine, depending on model. Please be aware that there are different screws used in the machine. Refer to the parts diagram to be sure...

This is a genuine manufacturer sourced replacement part designed for use with a variety of lawn and garden equipment. A lock nut is a type of nut that resists loosening when properly threaded onto a bolt. This is a standard hardware which will have multiple applications based on your equipment. This lock nut is made out of metal and it is sold individually.

It is an authentic OEM sourced item which is specially produced for use with lawn mowers made by MTD, Bolens, Yard Man, Yard Machines, Troy-Bilt, and Cub Cadet. The flange lock nut attaches to the rear wheel. It may require a socket set during installation and will need to be replaced if it becomes broken. This item is priced individually and is made out of metal.

This replacement tube clip is designed to securely hold the blower tube or other components in place, helping prevent them from loosening during use. Made from durable, high-quality materials, it provides reliable performance and stands up to regular wear. Easy to install and sold individually, it’s a convenient solution for maintaining proper fit and smooth operation of your equipment.

This screw is a high quality hardware that is specially manufactured for use on MTD and Yard Machines lawn and garden equipment. It is an authentic part that has multiple uses depending on the equipment. Make sure to check appropriate diagrams for correct location and applications of this screw. Please note, one hex head screw is included per order that will require a wrench to install or remove it.

This is an authentic replacement part for use with outdoor power equipment. This versatile metal lock washer has many applications for use with products like tillers, snowthrowers, and lawnmowers. The washer is sold individually, please see model diagram for part usage.

This is an authentic replacement part that is sourced from the original manufacturer for use with hedge trimmers. The special screw is commonly used to secure the front guard assembly. This screw is sold as an individual replacement part, please note four screws may be required.

This is an OEM part sourced directly from the manufacturer. The nut is commonly found in lawn tractors and snowblowers. This part is made of metal, and may be found in various locations in the machine, depending on model. Please be aware that there are different nuts used in the machine. Refer to the parts diagram to be sure of ordering the correct part. You will require a wrench when replaci...

This is a Genuine Manufacturer Approved replacement part used on a variety of Lawn and Garden Equipment. This screw has different applications depending on your equipment. This item is made out of Metal and is Sold Individually. Requires a Wrench to tighten or loosen.

This is a Genuine OEM replacement part used on a variety of Lawn and Garden equipment. The key helps to secure Flywheel in place. This is a Metal Key and it is Sold Individually. You would need Pliers to replace this item.

It is a genuine OEM supplied replacement part that is designed for use with walk-behind lawn mowers. This special screw is used to secure the chute deflector bracket to the main deck. It is a high-quality hardware which is made of durable metal and it is sold individually, please note you will need a wrench to install or remove it.

This item is a genuine OEM replacement part that is intended to be used with snowthrowers and lawnmowers from Ryobi, MTD, Yard Machines, Troy-Bilt, Bolens, and Yard-Man. The metal hex head screw is used with different types of machines and the application of the screw can vary based on the model of the equipment. This screw is sold as an individual replacement part.

This replacement screw is an authentic OEM sourced item, not an aftermarket equivalent. This is screw is used in a lot of different applications depending on your tool. Please check appropriate diagrams for correct use and location of this screw. This pan head screw is sold individually. You will need a torx screwdriver when working with this hardware.

It is a genuine item that is supplied by the original equipment manufacturer for Husqvarna blowers. This is an identical replacement for a missing or faulty nut that helps to secure the impeller, please make sure to check the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality part is made of durable metal and is sold individually.

This is an authentic item that is supplied by the original equipment manufacturer for use with walk-behind lawn mowers. It provides an identical replacement for a missing or a faulty dowel pin that was installed on a new unit. The pin helps to secure the gear, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind...

This is a genuine replacement part manufactured for use with outdoor power equipment. The screw includes a lock washer and is commonly used to secure the motor to the frame. This screw has various applications based on the model of the machine it is used with. The screw is sold as an individual replacement part, please see model diagram for part location and usage.