Weed Eater Lawn Tractor Bearings

This part is from original manufacturer. It is found in many models of Craftsman lawn tractor. This bearing fits between the rim and tire. A bearing secures a moving part for correct directional movement while allowing rotation. Because bearings are high-wear parts, it is not unusual to replace them often. This flange bearing is sold individually.

Genuine Husqvarna replacement part, this item is sold individually. This bearing is installed on top of the shaft which is encased in the mandrel assembly. The mandrel assembly is bolted to the mower deck. The shaft of the mandrel assembly is what the blade on all of the riding mowers listed below is attached to.

This is a genuine OEM part made for Craftsman lawn tractors and mowers. Bearings are used to buffer moving parts from damage due to friction. They also stabilize directional movement. Bearings are high-wear parts and are changed regularly. This metal bearing is sold individually. Gauges, washers, rings, etc. sold separately.

The thrust washer fits next to the ring and the 16 gauge washer. This is an authentic Craftsman replacement part used in compatible lawn tractors. This item is priced as an individual replacement. It is made of metal and may require a pair of pliers during the replacement of this part if it becomes broken.

Original Manufacturer Approved replacement Mandrell Shaft Assembly used on Lawn Tractors/Mowers. Includes all Metal shaft assembly, bearing, and nut. The Mandrel shaft is secured in Mandrel Housing and it goes through the deck and the pulleys are attached to it. Then the belt that drives the mandrels is placed on the pulleys. When replacing this part, First remove the Blade from the Mandrel Shaft....

This manufacturer-supplied replacement part is designed for Husqvarna, Poulan and Weed Eater riding lawn mowers and garden tractors. The bushing helps to secure the steering wheel shaft on the steering boot. It is an identical replacement for a missing or a damaged hardware that was installed on a new unit. To ensure the exact location and the correct installation, refer to the diagrams of your sp...

This authentic manufacturer-sourced part is specially designed for Craftsman riding lawn mowers and garden tractors. It is an identical replacement for a faulty or a missing bushing that was installed on a new unit. This special component helps to secure the fuel tank stem while ensuring a tight seal. Please make sure to refer to the owners manual and the appropriate diagrams of your model for the...

This part is made out of metal. The bushings fit between the steering shaft and the steer plate and help to support both parts. If these parts become broken they will need to be replaced and may require a socket set and a wrench set during the installation. They are genuine OEM sourced parts which are specifically designed for use with ride mowers by Husqvarna, Poulan, and Weed Eater.

This item is an original part from Poulan, Husqvarna, and Weed Eater for use in lawn mowers, lawn tractors, and trimmers. The bushing steering is made of plastic and attaches to the crossmember. You may need a set of pliers when replacing this part. It might break over time and will need replacing. Keep in mind that this item is sold individually.

This is a genuine replacement part sourced from the original manufacturer for use with riding mowers and lawn tractors made by Husqvarna, Weedeater, Jonsered, Poulan and Ryobi. This part allows the rod to swivel smoothly when the wheels are turning. It is recommended to review your models diagram to verify the parts compatibility. This part is made of durable material and sold individually.

This is a genuine replacement part manufactured for use with riding lawnmowers. This plastic bushing is used to guide the steering column through the frame, and reduce friction between the column and frame. This special bushing includes the bolts to mount it, and is sold as an individual replacement part.

This nylon bearing is an OEM part direct from Poulan. Compatible with many lawn and garden tractors, the bearing helps to secure the roll pin to the pedal cover. This item is sold individually, and a wrench is required for making the replacement.

The bearing flange attaches to the choke return spring. It is made of metal and is sold individually. This is an OEM part sourced directly from the manufacturer and used in carburetors, snowblowers, and lawn tractors made by Weed Eater, Walbro, Husqvarna, Poulan, and Jonsered. A set of pliers might be necessary during the installation of this part. This item will need to be replaced if it breaks.

This is an authentic part from original manufacturer. It is found in various Husqvarna, Poulan, and Weed Eater tractors/mowers. Ball bearings reduce friction between moving parts while helping keep them in proper position. This makes them high wear parts that are commonly replaced. This item is sold individually.

This is an original Craftsman replacement part. The needle bearing is commonly found in Craftsman lawn mowers. This part is made of metal, and is placed in the transaxle to allow the input shaft to rotate freely. This part is sold individually.