Poulan Lawn Tractor Engines

This is a genuine Toro replacement part. The camshaft is designed by the manufacturer for use in lawn tractors and engines. This part is made of metal, and is placed in the crankcase assembly to interact with the crankshaft. It comes with two metal tappet valves. You may require a wrench when replacing this item. This part is sold individually.

This is an Genuine OEM replacement part used on a variety of Lawn and Garden Engines. This part is made out of Metal and it is sold individually. The Push Rod rides on the camshaft to push the exhaust valve open during the exhaust stroke. A bent pushrod can not only affect your engine's performance, it can seriously damage other parts if the problem is not taken care of immediately.

This spark plug boot is a genuine OEM Briggs & Stratton replacement designed to fit securely over the spark plug, protecting the connection from moisture, dirt, and debris. Its durable, elbow-style design helps ensure reliable ignition and easy installation, making it an ideal replacement when a cracked, loose, or worn boot causes hard starting, misfires, or inconsistent engine performance.

This authentic component is supplied directly from the original equipment manufacturer for use with Briggs and Stratton engines commonly installed on lawn and garden equipment. It is an identical replacement for a missing or a faulty cylinder head that was installed on a new unit. Please make sure to check appropriate diagrams for the correct location and use of this hardware. Keep in mind this hi...

This is a genuine Briggs & Stratton replacement part that has been sourced from the original manufacturer to be used with small engines and lawnmowers from Toro. The metal connecting rod is used to link the engine's piston and the crankshaft assembly. This item is sold as a single item.

This gear-governor is a special component that helps to engage the drive shaft. It is a genuine Briggs and Stratton item that is supplied by the original manufacturer for use with small engines that are commonly installed on a variety of lawn and garden equipment. It provides an identical replacement for a damaged or a missing hardware that was installed on a new unit. Check the diagrams for your ...

This is a genuine Briggs and Stratton, Toro part for use with lawn and garden equipment engines. The crankcase breather valve opens to relieve pressure in the crankcase. The most common reason for replacing the breather is when the small engine runs poorly. This part is sold individually. Here is a list of tools that are needed to replace the breather valve a flat-head screwdriver, hammer, 7/16th-...

This is a genuine replacement part sourced from the original manufacturer for use with riding lawnmowers. The special tie rod is part of the searing assembly and is used to link the left and right spindle assembly. This tie rod is available as an individual replacement part, please see model diagram for associative parts.

This rocker arm adjuster, or valve lash adjuster, is a genuine OEM replacement part used in lawn tractors. It is approximately one inch long and made of steel. It is responsible for adjusting the clearance between the rocker arm and valve stem, which allows the valves to open and close as needed. The adjuster will need to be replaced if the threads are stripped, or if it is cracked, or worn down. ...

This is a genuine OEM supplied replacement part that is specially designed for Briggs and Stratton engines that are commonly installed on Toro lawn and garden equipment. It is the part that the piston is attached to. The piston is a central component of a two-cycle engine. It provides both the compression within the engine and it transfers the energy from combustion to the crankshaft which creates...

This is a manufacturer approved replacement part used on lawn and garden equipment. The push rod rides on the camshaft to push the exhaust valve open during the exhaust stroke. A bent push rod can not only affect your engine's performance, it can seriously damage other parts if the problem is not taken care of immediately. This part is made out of metal and it is sold individually.

This is a genuine Poulan, Husqvarna and Jonsered part for use with Lawn Tractors. The tie rod keeps the front wheels of the tractor aligned. The most common reason for replacing the short steering link is when the lawn mower is not steering properly. This part is sold individually. The tools that you will need to replace the tie rod is a -+ inch socket, 9/16 inch socket.

This piston ring set is used to seal the combustion chamber inside a small engine, helping maintain proper compression and control oil consumption. Replacing worn or damaged rings can improve starting, restore power, and reduce excessive smoke. It is commonly used during engine repairs or rebuilds when performance has dropped due to compression loss.

This authentic manufacturer-sourced part is specially made for use with lawn and garden equipment. The timing gear is an important component of an engine that helps to drive the unit, unfortunately, over time it may wear out or get damaged eventually requiring a replacement. This gear helps to rotate the camshaft, please make sure to refer to the appropriate diagrams of your model for the correct ...

This engine ring set is a genuine OEM replacement designed for small engine applications. It helps seal the cylinder properly to maintain compression, reduce oil consumption, and restore smooth, efficient engine operation. Ideal for engine rebuilds or repairs, this ring set should be replaced when wear causes power loss, excessive oil use, or reduced overall performance.

This brake linkage rod is a heavy-duty metal component designed to connect the operator’s brake pedal to the transmission braking system in riding lawn mowers and lawn tractors. Built from strong, rigid material to handle repeated force and tension, it transfers pedal movement into precise braking action for consistent stopping control. By maintaining proper linkage alignment and responsiveness, i...

The connecting rod is part of the crankcase assembly. It is a genuine item that is supplied by the original equipment manufacturer for use with Briggs & Stratton engines and Toro lawn tractors. This part is made of metal and is available individually. During replacement, it may require a screwdriver to help install this part correctly. It will require replacing if it becomes broken.

This is a genuine manufacturer-approved replacement push-rod which is used with Briggs and Stratton engines commonly installed on lawn and garden equipment. The push rod rides on the camshaft to push the exhaust valve open during the exhaust stroke. A bent push-rod can not only affect your engine's performance, it can seriously damage other parts if the problem is not taken care of immediately. Th...

This non-adjustable tie rod is designed for riding lawn mowers and lawn tractors to connect steering components and maintain proper front-wheel alignment. Made from durable steel, it supports smooth, predictable steering and stable handling during operation. It’s a practical replacement for correcting loose steering or pulling issues caused by a bent or worn tie rod.